Product#: GW505

1965-70 Impala / Full Size Adjustable Rear Panhard Bar

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car, plus...

Product#: H1514

1965-70 Impala / Full Size Adjustable Panhard Rod

Reduce unwanted wheel hop and compensate for changes in ride height with this adjustable panhard rod. Fabricated from high quality tig welded steel and finished in black powder coat. Comes with greaseable polyurethane...

Product#: A5500321

1965-72 Chevrolet, GM Truck; 1/2 Ton 2WD; Double Adjustable Rear Trac Bar Kit

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment of the rear end. The adjustable units will adjust to the correct length to improve your vehicle's...

Product#: A5500320B

1963-72 GM Truck; Double Adjustable Bent Trac Bar Kit

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment of the rear end. The adjustable units will adjust to the correct length to improve your vehicle's...

Product#: UM2029B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Center Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: GW504

1965-70 Impala / Full Size Adjustable Rear Panhard Bar And Bracket Set

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car, plus...

Product#: 5289QA

1965-70 Impala; Caprice; Bel Air; QA1 Adjustable Panhard Bar

QA1's panhard bars resist unwanted flex and twisting, keeping the axle properly located under the chassis for improved cornering. This bar is specifically designed for your 1965-70 Chevrolet B-body and is adjustable. Made in...

Product#: TB657221

1965-72 Chevrolet/GMC Truck; Double Adjustable Trac Bar

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment. The adjustable units will adjust to the correct length to improve your vehicle's handling ability...

Product#: UM2020B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Non-Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: HS900105A

1947-54 GM Truck Bolt-On Panhard Bar for Stock Housing

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame brackets and...

Product#: HS900103A

1955-59 GM Truck Bolt-On Panhard Bar for Stock Housing

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame brackets and...

Product#: HS900103B

1955-59 GM Truck Bolt-On Panhard Bar for Centered Housing

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame brackets and...

Product#: CX2035

1959-64 Impala, Bel Air, Biscayne; 1959-62 Corvette; Rear Strut Rod Bushing; for Panhard Bar or Rear Strut Rod; Each

Reproduction bushing for the rear panhard rod on 1959-64 Chevrolet Impala, Bel Air, Biscayne models, and for the rear strut rod on 1959-62 Corvette. If your full size Chevrolet or Corvette model is feeling loose around...

Product#: GW506

1965-70 Impala / Full Size Adjustable Rear Panhard Bar Mount Bracket

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car, plus...

Product#: BX20166B

1982-02 Camaro / Firebird BMR Panhard Rod Relocation Set with Black Hammertone Finish

This set replaces and relocates the panhard rod, allowing clearance for routing dual 3" exhaust over the axle. This tubular upper panhard rod support mounts in the OE location using existing mounting holes and lowers the...

Product#: UM201529A

1982-2002 GM F-Body - Lower Control Arms & On-Car Panhard Bar Kit (On-Car Adjustable) - Red

This kit replaces the weak, factory stamped lower control arms and panhard bar with a heavy duty tubular setup. These direct bolt-on replacements minimize wheel hop, improve cornering while lowering ET's and helping track...

Product#: BX20166A

1982-02 Camaro / Firebird BMR Panhard Rod Relocation Set with Red Powdercoat Finish

This set replaces and relocates the panhard rod, allowing clearance for routing dual 3" exhaust over the axle. This tubular upper panhard rod support mounts in the OE location using existing mounting holes and lowers the...

Product#: BX20161A

1982-02 Camaro / Firebird BMR Adjustable DOM Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: LW20440

1982-02 Camaro/Firebird; Lakewood; Adjustable Panhard Rod

Designed for all 1982-2002 models, this new panhard rod from Lakewood is engineered to keep the rear end centered and aligned under severe cornering conditions. Manufactured from thick wall steel tubing to prevent flex and...

Product#: UM2020A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Non-Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: E5202

1982-02 Camaro / Firebird Non-Adjustable Tubular Panhard Rod

This tubular panhard rod resist unwanted flex and twisting to keep the axle located for improved cornering and drivability. The CNC-machined, MIG-welded rod features fluted, greasable, graphite/polyurethane bushings for long...

Product#: PHC4

1982-02 Camaro / Firebird Global West Adjustable Panhard Rod with Bearing and Rod End

The panhard rod control lateral placement of the rear end in the chassis. The stock panhard rod design can lead to a lateral location problem of the rear end based on too much deflection, making the car feel "loose" in the...

Product#: BX20164B

1982-02 Camaro / Firebird BMR Chrome Moly Adjustable Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: UM201529B

1982-2002 GM F-Body - Lower Control Arms & On-Car Panhard Bar Kit (On-Car Adjustable) - Black

This kit replaces the weak, factory stamped lower control arms and panhard bar with a heavy duty tubular setup. These direct bolt-on replacements minimize wheel hop, improve cornering while lowering ET's and helping track...

Product#: H1501

1982-02 Camaro / Firebird Black Powdercoated Adjustable Panhard Rod

Get a grip! On the pavement, that is. Improve the handling and traction on your 3rd or 4th Generation F-body by upgrading the flimsy stock rear suspension. These rear adjustable panhard rods help you put the power to the...

Product#: PHC2

1982-02 Camaro / Firebird Global West Non-Adjustable Panhard Rod with Polyurethane Bushings

The Panhard rod controls lateral placement of the rear end in the chassis. The stock panhard rod design can lead to a lateral location problem of the rear end based on too much deflection, making the car feel "loose" in the...

Product#: PHC3

1982-02 Camaro / Firebird Global West Adjustable Panhard Rod with Polyurethane Bushing and Rod End

The panhard rod control lateral placement of the rear end in the chassis. The stock panhard rod design can lead to a lateral location problem of the rear end based on too much deflection, making the car feel "loose" in the...

Product#: BX20160A

1982-02 Camaro / Firebird BMR Non-Adjustable DOM Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20160B

1982-02 Camaro / Firebird BMR Non-Adjustable DOM Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20161B

1982-02 Camaro / Firebird BMR Adjustable DOM Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20162A

1982-02 Camaro / Firebird BMR 2-Way DOM Adjustable Panhard Rod with Rod Ends & Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20162B

1982-02 Camaro / Firebird BMR 2-Way DOM Adjustable Panhard Rod w/Rod Ends & Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20163A

1982-02 Camaro / Firebird BMR Chrome Moly Non-Adjustable Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20163B

1982-02 Camaro / Firebird BMR Chrome Moly Non-Adjustable Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20164A

1982-02 Camaro / Firebird BMR Chrome Moly Adjustable Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20165A

1982-02 F-Body BMR 2-Way Chrome-Moly Adjustable Panhard Rod w/Rod Ends, Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: BX20165B

1982-02 F-Body BMR 2-Way Chrome-Moly Adjustable Panhard Rod w/Rod Ends, Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...

Product#: UM201520B

1982-2002 GM F-Body - Lower Control Arms & On-Car Panhard Bar Kit (Non-Adjustable) - Black

This kit replaces the weak, factory stamped lower control arms and panhard bar with a heavy duty tubular setup. These direct bolt-on replacements minimize wheel hop, improve cornering while lowering ET's and helping track...

Product#: E5222

1982-02 Camaro / Firebird Adjustable Tubular Panhard Rod

This tubular panhard rod resist unwanted flex and twisting to keep the axle located for improved cornering and drivability. The CNC-machined, MIG-welded rod features fluted, greasable, graphite/polyurethane bushings for long...

Product#: UM2036A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2019B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2036B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM201520A

1982-2002 GM F-Body - Lower Control Arms & On-Car Panhard Bar Kit (Non-Adjustable) - Red

This kit replaces the weak, factory stamped lower control arms and panhard bar with a heavy duty tubular setup. These direct bolt-on replacements minimize wheel hop, improve cornering while lowering ET's and helping track...

Product#: UM2029A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Center Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2019A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2022A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (On-Car Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2022B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (On-Car Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2021A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2021B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (End Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2037A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (On-Car Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2037B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (On-Car Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2023A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Dual Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2023B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Dual Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2038A

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Dual Adjustable) - Red

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: UM2038B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Dual Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: GW844

1958-64 Impala, Bel Air, Biscayne; Adjustable Rear Panhard Bar

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car, plus...

Product#: G4659

1982-02 F-Body Rear Axle Panhard Rod (82-87 Heavy Duty, 88-02 All)

Original GM rear axle panhard rod used to keep the rear end centered and aligned.

Product#: 88L330

1979-98 Ford Mustang; Maximum Motorsports Panhard Bar; Standard / Natural Finish

Installing a panhard bar is one of the most dramatic changes that you can make to improve the stability of your 1979-98 Mustang. The panhard bar is a bolt-on solution to eliminate the lateral axel movement that causes the...

Product#: 14049

1959-64 Impala / Full Size Black Adjustable Panhard Rod

If your full size Chevrolet is feeling a little loose in the corners, maybe the rear panhard rod is worn out. If so, this replacement panhard rod which features installed bushings will restore stability to your 1959-64 full...

Product#: B9286

1959-64 Impala / Full Size Black Non-Adjustable Panhard Rod

If your full size Chevrolet is feeling a little loose in the corners, maybe the rear panhard rod is worn out. If so, this replacement panhard rod which features installed bushings will restore stability to your 1959-64 full...