1947-55 Chevrolet, GMC Truck; Floor Mounted Starter Switch
Reproduction of the original floor mounted starter switch designed for use with 1947-55 Chevy and GMC truck models. Each switch is designed and manufactured to replicate the original in fitment and functionality. Note: 1955...
Driver Side Mount Performance High-Torque Light Weight Starter 168 Tooth Flywheel
Classic now offers high torque starters that will replace your original with upgraded performance.This high torque, light weight performance starter features 200 ft. lbs. of torque, 4.4:1 gear reduction, billet aluminum...
Driver Side Mount Performance High-Torque Light Weight Starter 168 Tooth Flywheel
Classic $349.99 ea
Painless Hot Shot Starter Solution; without Engine Bump Start Switch
The solution for vehicles with GM starters that are hard to start when hot, or vehicles with old or worn out electrical systems. Works by boosting available amperage to the starter solenoid. Installation Instructions:...
Painless Hot Shot Starter Solution; without Engine Bump Start Switch
Classic $36.99 ea
This all new high torque small case starter is just what you'll need if you have a built engines with headers. For Chevrolet small block or big block engines when header clearance is a problem.
Chevrolet; High Torque Small Case Starter; Small Block & Big Block; 2 Bolt Staggered Mount; For 168 Tooth Flywheel
Classic $161.99 ea
MSD; Chevrolet Small/Big Block; V8; Dynaforce Starter
DynaForce starters are designed for severe duty, high compression applications. The 3.4 hp motors use a 4.4:1 gear reduction to easily start even an 18:1 engine with a lower current draw than traditional starters. Features a...
Starter Bolt 3/8"-16 X 4-11/16"
Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.
1950-62 Ford/Mercury; Bendix Starter Drive Assembly; Inertia Type
Replacement bendix drive assembly for Ford 12V Inertia Starter Motors. Replaces Ford part# C1AZ-11350-A or Motorcraft Part# SD-3.
In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, we offer a non-conductive strap-on heat shield with a highly-reflective...
1969-70 GM Starter Solenoid Mounting Set; Big Block; Heat Sheild
Reproduction of the starter heat shield retainer nut designed for use with a variety of Chevrolet big block models. This special retaining nut holds part number # 361443 starter motor solenoid heat shield in place on models...
Painless Remote Starter Solenoid Set
This set allows you to position the starter solenoid any place you need to in order to make maintenance easier, clean up an inner fender or just replace a factory starting circuit. Installation Instructions: Download Here Set...
GM Starter Bolt 3/8"-16 X 1-7/8"
Genuine GM starter bolt for various models. Replaces OE # 14097279 - starter mounting bolt (short) 3/8-16 x 1.87" (or 3/8"-16 X 1-7/8"). Fits most (non gear reduction) small block & big block chevy starters. Sold...
3/8"-16 X 3-5/8" Starter Mount Bolt
This replacement shouldered medium length bolt commonly used to secure starters with a cast iron staggered pattern nose to a big block engine. Two bolts required per vehicle.
Replacement Shim Kit For P/N 66256
Fits Proform Starter #66256 for Small/Big Block Chevy
Replacement Pinion For P/N 66256, 66258 & 66259.
Replacement for Starter #66256, #66258, #66259, and other similar models
Painless Hot Shot Plus Starter Solution; with Engine Bump Start Switch
The solution for vehicles with GM starters that are hard to start when hot, or vehicles with old or worn out electrical systems. Works by boosting available amperage to the starter solenoid. The Hot-Shot Plus model includes...
Painless Hot Shot Plus Starter Solution; with Engine Bump Start Switch
Classic $56.99 ea
High Torque Starter. Fits Chevy S/B, B/B And V8S. 168-Tooth Flywheel. Staggered Mount, 14:1 Comp.
For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque...
High Torque Starter. Fits Chevy S/B, B/B And V8S. 168-Tooth Flywheel. Staggered Mount, 14:1 Comp.
Classic $148.99 ea
Starter Bolt; 3/8"-16 X 4.33"; For 4.3L 5.0L 5.7L, or 502 Engine
Genuine GM starter bolts for various models. For 4.3L 5.0L 5.7L, or 502 Engine. Replaces GM Numbers 12338064, 09000852, or 10465167. Works with GM Performance 9000852 or 12606096 high-torque mini starters, also works with...
Touch Sensitive Starter System with Advanced Security - For Use without Ron Francis Harness
Looking for something to set your ride apart, make it more like late model rides? Install this complete touch sensitive starter system from Ron Francis. This system simulates all five positions of a typical keyed ignition...
This all new Proform high torque small case starter is just what you'll need if you have a built engines with headers. For Chevrolet small block or big block engines when header clearance is a problem.
Chevrolet; High Torque Small Case Starter; Small Block & Big Block; 12V; 10:1 Ratio ; For 168 Tooth Flywheel
Classic $139.99 ea
No more jumping from under the hood, to the front seat, to under the hood! Easily test your engine with the PROFORM Remote Starter Switch.
Touch Sensitive Starter System with Advanced Security - For Use with Ron Francis Harness
Looking for something to set your ride apart, make it more like late model rides? Install this complete touch sensitive starter system from Ron Francis. This system simulates all five positions of a typical keyed ignition...
New staggered High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque,...
1954-55 Ford / Mercury V8/L6; Remanufactured Starter Motor; 6-Volt
Remanufactured starter motor for various Ford and Mercury V8 models including Fairlane, Ranch Wagon, Customline, and F-Series Truck. Each premium quality starter undergoes a rigorous remanufacturing process to deliver the...
1954-55 Ford / Mercury V8/L6; Remanufactured Starter Motor; 6-Volt
Classic $109.99 ea
1962-70 Chevrolet; Starter Mount Bolt Set; Small Block
Reproduction of the original style starter bolts designed for use with 1962-70 Chevrolet models with small block engines. This bolt set contains one 3/8"-16 x 1-27/32" short bolt, and one 3/8"-16 x 4-21/64" long bolt. This is...
1958-81 Long Version Starter Solenoid
The starter motor solenoid commonly needs to be replaced due to heavy use and heat which is generated from the engine and exhaust manifolds.
1955-92 Remanufactured Starter
Replace your worn out starter with this quality remanufactured starter. It is remanufacured to original specifications and will install and function as original. Sold Outright - No Core Required Camaro applications: 4...
1957-62 Chevrolet 235 6 Cylinder 2 Bolt Ear Mount Style 12 Volt Remanufactured Starter
Replace your worn out starter with this quality remanufactured starter. It is remanufacured to original specifications and will install and function as original.
1957-62 Chevrolet 235 6 Cylinder 2 Bolt Ear Mount Style 12 Volt Remanufactured Starter
Classic $142.99 ea
1964-81 Chevrolet; High-Torque Starter; Straight Mount; 153 Tooth Flywheel
Classic offers this high torque starter that will replace your original with upgraded performance and OEM appearance. Note: This starter mounts on the passenger side of the vehicle and requires 1 long bolt and 1 short bolt to...
1964-81 Chevrolet; High-Torque Starter; Straight Mount; 153 Tooth Flywheel
Classic $179.99 ea
Ultra-Torque Starter 250 Ft/Lb Natural
Powermaster Mopar replacement starters for all 1965-76 Mopar models. Each starter includes a dyno sheet to show how well the starter you just bought performs. The torque output of a starter is the most important...
High Torque Starter For Pontiac And Oldsmobile. 12V 1.4Kw Motor, 11:1 Comp.
High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor...
High Torque Starter For Pontiac And Oldsmobile. 12V 1.4Kw Motor, 11:1 Comp.
Classic $182.99 ea
High-torque, gear-reduction design. 100% new, not rebuilt. Offset design results in more clearance between oil pan and starter, can be rotated for additional chassis clearance. The high-torque, high-output motor spins the...
1964-81 GM; Starter Shim Set; 5 Pieces
5-piece starter shim set for Chevrolet and Pontiac models. Set includes (1) 1/16" shim, (2) 1/32" shims and (2) 1/64" shims. They are used to shim the starter to the engine block.
1970-81 Chevrolet; Starter; Staggered Mount; 168 Tooth Flywheel; Aluminum Nose
Classic offers this high torque starter that will replace your original with upgraded performance and OEM appearance.
1970-81 Chevrolet; Starter; Staggered Mount; 168 Tooth Flywheel; Aluminum Nose
Classic $189.99 ea
High Torque Starter. Chevy V6, S/B & B/B V8. Heavy Duty 12V 2.2 Motor, 15:1 Comp.
High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor...
High Torque Starter. Chevy V6, S/B & B/B V8. Heavy Duty 12V 2.2 Motor, 15:1 Comp.
Classic $148.99 ea
1970-81 2 Bolt Staggered Mount 168 Tooth Aluminum Nose High Torque Remanufactured GM Starter Motor
Replace your original worn out starter with a Genuine GM starter. We now offer this original style rebuilt starter. Maintain originality along with the reliability of a factory replacement. Aftermarket starters are good but...
1970-81 2 Bolt Staggered Mount 168 Tooth Aluminum Nose High Torque Remanufactured GM Starter Motor
Classic $101.99 ea
Powermaster Mopar replacement starters for all 1965-76 Mopar models. Each starter includes a dyno sheet to show how well the starter you just bought performs.
Manufactured with die-cast and billet aluminum. This new high performance gear reduction starter weighs only 10 lbs! Fits small block and big block Chevrolet V8 models with 153 and 168 tooth flywheels, standard or automatic...
Chevrolet Small Block / Big Block; 3 HP High Torque Gear Reduction Mini Starter; 2-Bolt Straight Mount
Classic $191.99 ea
1948-53 Ford/Mercury; Bendix Starter Drive Assembly; Inertia Type
Replacement bendix drive assembly for Ford 6V Inertia Starter Motors. Replaces Ford part# B-11350.
1966-69 Mopar Starter Mounting Hardware Set
Starter mounting hardware set for all 1966-69 Mopar models with a Hemi engine and manual transmission. This mounting set is for the direct drive starter that was used exclusively on 1966-69 manual Hemi models. Each set...
1956-61 Ford / Mercury V8/L6; Remanufactured Starter Motor
Remanufactured starter motor for various Ford and Mercury V8 models including Fairlane, Galaxie, Ranchero, and F-Series Truck. Each premium quality starter undergoes a rigorous remanufacturing process to deliver the...
High torque, gear reduction design. 100% New, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. 15-to-1 compression for maximum...
Gm High Torque Gear Reduction Starter, Chevy S/B & B/B, 2.0 Kw Motor, For 15:1 Conpression Ratio Engines
Classic $199.99 ea
1966-72 Mopar A, B & E-Body; Remanufactured Starter; 3-Bolt
Replace your burned-out original starter with these quality remanufactured starter motors. Remanufactured to meet or exceed original factory specifications, each will fit, install and function exactly as original....
1948-53 Ford / Mercury V8/L6 w/ Manual Transmission; Remanufactured Starter Motor; 6-Volt
Remanufactured starter motor for various Ford and Mercury V8 models with standard/manual transmissions including Deluxe, Ranch Wagon, Custom, and F-Series Truck. Each premium quality starter undergoes a rigorous...
1948-53 Ford / Mercury V8/L6 w/ Manual Transmission; Remanufactured Starter Motor; 6-Volt
Classic $89.99 ea
1967-70 Camaro 350 Date-Coded Remanufactured Starter; GM Part # 1108338
Remanufactured starter motors are now available for the discriminating restorer or purist who is looking for a starter to correctly match his engine build date. Starters come complete with solenoid. Important: Wh en ordering...
Chevrolet Small Block/Big Block; Permanent Magnet Gear Reduction High Torque Starter; 1.4 HP
Manufactured with die-cast and billet aluminum. This new high performance permanent magnet gear reduction starter weighs only 7.5 lbs and has a lower current draw then most other gear reduction starters. Fits small and big...
Small Block / Big Block 3 HP High Torque Gear Reduction Mini Starter - Red Case
Manufactured with die-cast and billet aluminum. This new high performance gear reduction starter weighs only 10 lbs.! Fits small block and big block Chevy V8 models with 153 and 168 tooth flywheels, standard or automatic...
Small Block / Big Block 3 HP High Torque Gear Reduction Mini Starter - Red Case
Classic $304.99 ea
1968-74 Chevrolet; Starter Motor Solenoid Heat Shield; with Big Block; Various Models
Reproduction of the factory-style solenoid heat shield designed for use on various 1968-74 big block Chevrolet models. This high-quality shield is manufactured in stamped steel to match the original configuration for an...
1968-74 Chevrolet; Starter Motor Solenoid Heat Shield; with Big Block; Various Models
Classic $24.99 ea
Chevrolet Small Block / Big Block 1.4 HP High Torque Gear Reduction Mini Starter
Manufactured with die-cast and billet aluminum. This new high performance gear reduction starter weighs only 10 lbs.! Fits small block and big block Chevy V8 models with 153 and 168 tooth flywheels, standard or automatic...
Chevrolet Small Block / Big Block 1.4 HP High Torque Gear Reduction Mini Starter
Classic $178.99 ea
1955-81 GM; Starter Motor Brush Set
When rebuilding your original starter motor, it is usually necessary to replace the brushes. The brushes are the most commonly worn out part of the starter which can cause failure. These brushes are stamped 945 and contain a...
1951-56 Ford / Mercury; Replacement Starter Relay Solenoid Switch; 6-Volt
Replacement style starter relay solenoid switch for 1951-56 Ford and Mercury cars and trucks. Replaces Ford part# B5A-11450.
1951-56 Ford / Mercury; Replacement Starter Relay Solenoid Switch; 6-Volt
Classic $15.99 ea
1967-92 Chevrolet Small/Big Block Engines Starter With 168-Tooth Flywheel - Staggered Mount
Bench tested to meet or exceed stated specifications, these high torque starters for use with small or big block V8 engines. Made in the USA with 100% new components Applications: 1967-92 Chevrolet Full-size, Camaro, Truck...
1967-92 Chevrolet Small/Big Block Engines Starter With 168-Tooth Flywheel - Staggered Mount
Classic $195.99 ea
1955-93 Long Version Gold Series Starter Solenoid
The solenoids are manufactured with a high-temperature insulated wire for better heat resistance, a nickel-plated mounting bracket for better ground and an increased contact area on studs for higher electrical current...
1970-84 Chevrolet, GMC; Starter Motor Brace; For 168 Tooth Starter
Stamped steel starter motor brace for a wide variety of 1970-84 Chevrolet and GMC car and truck models with 168 tooth starter. Over a period of years, the starter motor brace can be lost or discarded when the starter is...
1967-92 Chevrolet L6 Or Small/Big Block V8 Engines Starter - Straight Mount
Bench tested to meet or exceed stated specifications. Made in the USA with 100% new components Applications: 1966-81 Chevrolet Full-size, Camaro, Truck 1966-79 Nova
1967-92 Chevrolet L6 Or Small/Big Block V8 Engines Starter - Straight Mount
Classic $305.99 ea
1957-95 Chevrolet Straight Mount 168 Tooth Flywheel High-Torque Light Weight Performance Starter
Classic now offers high torque starters that will replace your original with upgraded performance. Features: 200 ft. lbs. of torque 4.4:1 gear reduction Billet aluminum adapter blocks Weighs only 8 l bs! Includes with shims...
1957-95 Chevrolet Straight Mount 168 Tooth Flywheel High-Torque Light Weight Performance Starter
Classic $259.99 ea
1955-82 Remanufactured Starter 2 Bolt Staggered Mount with Iron Nose
Replace your worn out starter with this quality remanufactured starter. It is remanufacured to original specifications and will install and function as original. Sold Outright - No Core Required Camaro applications: 1967-68...
1955-82 Remanufactured Starter 2 Bolt Staggered Mount with Iron Nose
Classic $159.99 ea
High Torque Starter. Chevy V6, S/B & B/B V8. Chrome 12 V 1.4 Kw Motor, 11:1 Comp
High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor...
High Torque Starter. Chevy V6, S/B & B/B V8. Chrome 12 V 1.4 Kw Motor, 11:1 Comp
Classic $172.99 ea
For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque...
High Torque Starter. Fits Chevy S/B, B/B And V8S. 168-Tooth Flywheel. 4.41:1 Gear Reduction, 14:1 Comp.
Classic $144.99 ea
1966-72 Chevrolet; Starter Mount Bolt Set; Big Block
Reproduction of the original style starter bolts designed for use with 1966-72 Chevrolet models with 396, 401, 409, 427, 454 big block engines. This bolt set contains two 3/8"-16 x 3-5/8" bolts. Starters with a cast iron...