Product#: ST016

1955-72 Buick, Chevy, Pontiac, Oldsmobile, Full Size; Convertible Top Hydraulic Pump Seal Set

Hydraulic pump seal set designed as a direct service replacement for use with various 1955-72 GM full size convertible models. This comprehensive set includes two large O-rings that seal each end of the reservoir (only one...

Product#: 3698109

1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each

Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...

Product#: HK237

1955-62 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size; Convertible Top Motor And Pump Assembly; Various Models

Reproduction convertible top motor & pump assembly designed to provide consistent hydraulic pressure and long-term dependability. This unit allows you to raise and lower the power top with ease, replacing your old or worn out...

Product#: HK261

1959-60 Buick, Cadillac, Chevy, Pontiac, Oldsmobile Full Size; Convertible Top Cylinder; Each

Reproduction convertible top cylinder for 1959-1960 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum casting for superior strength compared...

Product#: CM4009

1955-93; Convertible Top Cylinder Hose Kit; Universal Replacement

Universal style replacement convertible top cylinder hoses designed for use with GM, Ford, and Chrysler models between 1955-1993 as listed below. These OEM style universal replacement hoses are constructed from high quality...

Product#: HK232

1964-66 Skylark, Chevelle, 442, Cutlass, GTO, LeMans; Convertible Top Motor Pump Assembly; Original Style; Made in the USA!

Reproduction convertible top motor made to deliver consistent hydraulic pressure and dependable performance. Allows smooth raising and lowering of the power top. Each motor includes rubber mounts and features original style...

Product#: HK220

1955-61 Bel Air, Impala, Electra; Convertible Top Hydraulic Hose Set; Black Rubber; Various Models

Reproduction of the original style hydraulic hose set designed to fit a wide variety of 1955-61 Buick, Chevrolet, Cadillac, Oldsmobile, and Pontiac convertible models as listed. Original hose sets are nearly impossible to...

Product#: 80L606

1983-93 Mustang; Convertible Top Hydraulic Cylinder; Driver or Passenger Side Each

Reproduction of the original convertible top cylinder designed for use with 1983-93 Mustang models. This brand new direct fit replacement is compatible with the OEM mounts and hoses. Every cylinder is is bench tested to...

Product#: MB2298

1960-63 Dodge, Plymouth Full Size; Convertible Top Hydraulic Cylinder; Each; Made in the USA!

Reproduction of the original convertible top cylinder designed for use with 1960-1963 Dodge Dart, Polara, Plymouth Fury, and Fury Sport convertible models. All convertible top cylinders are not the same. This convertible top...

Product#: HK234

1960-72 GM, Chrysler, Ford; Convertible Top Hydraulic Hose Set; with Power Top; White Hose; O.L.114"; Center to End 57-1/4"

Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...

Product#: HK240

1965-70 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Convertible Top Motor & Pump Assembly; Full Size Models

Reproduction of the original style convertible top motor and pump assembly designed to provide reliable hydraulic pressure and dependable performance. This unit allows you to raise and lower your power top with ease by...

Product#: RD7003

1959-60 GM Full Size B-Body; Convertible Top Cylinder to Floor Brackets; Pair

Reproduction of the original convertible top cylinder to floor brackets for use with 1959-60 GM B-Body convertible models as listed. Each bracket is manufactured in stamped steel to factory specifications. Will replace the...

Product#: ST013

1971-76 Impala, Caprice, LeSabre, Delta 88, Catalina; Convertible Top Actuator Gear; Small; Various Models

Reproduction of the original convertible top actuator gear designed for use with various 1971-76 GM full size models. This small gear is an exact replacement for the factory unit and is ideal for repairing worn or damaged...

Product#: HK233

1962-63 Nova, 1967-72 Chevelle, 1967-69 Camaro, Firebird; Convertible Top Motor Pump Assembly Original Style; Made in the USA

Reproduction convertible top motor engineered to deliver consistent hydraulic pressure and dependable operation. This unit makes it easy to raise and lower your power top by replacing a weak or worn out original. Each motor...

Product#: HK265

1965-1970 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size; Convertible Top Cylinder; Each; Made in the USA!

Reproduction of the original convertible top cylinder designed for use with 1965-1970 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum...

Product#: CRP400

1958-64 Impala Convertible 24 Piece Pinch Rail Pad Set

Don't try to re-use old, compressed and hardened originals, these pads will make your top replacement more complete and better fitting. Mounts in trunk between the rear pinch rail and the body.

Product#: HK241

1964-67 GM A-Body; Convertible Top Hydraulic Hose Set; with Power Top; White Hose

Reproduction of the original hydraulic hose set designed for use with 1964-67 GM A-body convertible models as listed. Original hoses for these early convertibles are nearly impossible to find, making this reproduction set the...

Product#: ST003A

1971-76 Impala, Caprice, LeSabre, Catalina, Eldorado; Convertible Top Drive Gear Housing; with Power Top

Reproduction of the original style convertible top drive gear housing designed for use with 1971-76 Buick, Chevrolet, Pontiac, Oldsmobile full size models as listed. This gear housing is designed for use with 1971-76 "scissor...

Product#: CBK400

1962-64 Impala Convertible Top Bolt Set

This nickel plated hardware set allows you to replace every bolt, screw, nut, bushing, grommet, etc., in your original convertible top frame. Each set contains detailed instructions, separately bagged and labeled parts for...

Product#: C953693

1963-72 GM; Convertible Top Cylinder to Frame Shoulder Bolts; Various GM Models; Pair

Reproduction of the original convertible piston bolt set designed for use with various 1963-72 GM convertible models including 1967-69 Camaro, Firebird, and 1968-72 Chevelle models. These bolts are used to attach the...

Product#: HK867

1966-67 Lincoln Continental; Deck Lid; Convertible Top Motor/Pump Assembly; Each

Original style replacement Deck Lid, Convertible Top Motor/Pump Assembly for 1966-1967 Lincoln Continental. You won't find a better made convertible top cylinder on the market. The cosmetic appearance may vary slightly from...

Product#: HK243

1967-69 Camaro, Firebird; Convertible Top Hydraulic Hose Set; with Power Top; White Hose; Pair

Reproduction of the original hydraulic hose set designed for use with 1967-69 Camaro and Firebird convertible models as listed. Original hoses for these vehicles are nearly impossible to locate, making this reproduction set...

Product#: CM2148A

1961-64 Impala, Nova, Electra, Wildcat; Convertible Convertible Chrome Top Latch Screw; Each

Reproduction of the convertible latch screws designed for use with 1961-64 GM convertible models as listed below. Each phillips head screw is manufactured to correct specifications featuring a chrome finish matching the...

Product#: UCR001

1955-64 Bel Air/Impala; Bolt Set; For Convertible Top Upper Cylinder Rod; 8-Piece Set

This is reproduction of the factory convertible top upper cylinder rod bolt set for 1955-57 Bel Air and 1958-64 Impala convertible models. Each 8-piece set includes (2) bolts, (2) nylon bushings, (2) wavy washers, and (2)...

Product#: HK235

1967-69 Camaro, Firebird; Convertible Top Cylinder; Each

Reproduction convertible top cylinder for 1967-69 Camaro and Firebird convertible models. Not all convertible top cylinders are created equal. This version is manufactured from solid aluminum casting, providing superior...

Product#: TF400955

1955-57 Bel Air, Bonnevelle, Catalina, Star Chief; Convertible Top Cylinder; Each; Made in the USA!

Reproduction convertible top cylinder for 1955-57 Bel Air, Bonneville, Catalina, and Star Chief convertible models. All convertible top cylinders are not the same, and this version is manufactured from a solid aluminum...

Product#: MD2129

1964-93 Ford, Mercury, Chrysler, Dodge, Plymouth; Convertible Top Motor & Pump Assembly; Various Models

This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1964-93 Ford, Mercury, Chrysler, Dodge, Plymouth models including, but not limited...

Product#: ST015

1971-76 Impala, Caprice, LeSabre, Delta 88, Catalina; Convertible Rain Gutter Wire

Reproduction of the original style rain gutter wire designed for use with various 1971-76 GM full size models as listed. This wire is inserted into the convertible top well liner to provide support for the rain gutter. An...

Product#: G9153

Convertible Motor Pump Valve Ball

Convertible Motor Hydraulic Pump Valve Ball: Replacement valve ball for use with original General Motors convertible top motor. Each original motor requires 4 valve balls. For use on OEM motors only. Not for use on...

Product#: MD2198

1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each

Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...

Product#: RD7004

1961-62 GM B-Body Full Size; Convertible Top Cylinder to Floor Brackets; Pair

Reproduction top cylinder to floor brackets for 1961-62 GM full size B-Body convertible models. Each bracket is manufactured in stamped steel to factory specifications. Will replace the old or missing brackets exactly. Sold...

Product#: 378887

1964-70 Mustang; Convertible Top Cylinder Clevis Pin Kit

The clevis pins are an important component in your power convertible top system. These pins connect the power cylinder to the convertible top frame and see a considerable amount of wear over time. This complete kit includes 2...

Product#: 53456E

1994-2004 Mustang; Convertible Top Hose Set; with Power Top; Upper And Lower; Made in the USA

Reproduction of the original hydraulic hose set designed for use with 1994-2004 Mustang convertible models as listed. Finding an original hose for your early convertible is next to impossible. If you own a convertible model...

Product#: CBK402

1958 Impala Convertible Top Bolt Set

This nickel plated hardware set allows you to replace every bolt, screw, nut, bushing, grommet, etc., in your original convertible top frame. Each set contains detailed instructions, separately bagged and labeled parts for...

Product#: HK237K

1958 Chevrolet Impala; Convertible Top Motor Pump Kit

New reproduction convertible top motor pump kit for 1958 Chevrolet Impalas. This kit includes 12 Volt pump and motor assembly, 2 top lift cylinders, upper and lower hoses.

Product#: KW458

1964-68 Camaro, Firebird, Impala; Convertible Switch Mounting Bracket

Correct reproduction of the original underdash convertible switch mounting bracket designed for use with 1967-1968 Camaro, 1964-68 Chevelle, 1968 Impala, 1965-69 Corvair, and 1967-68 Firebird convertible models. Manufactured...

Product#: 9875101

1971-76 Chevrolet Impala, Caprice, Pontiac Catalina; Power Convertible Top Relay; 6-Terminal

New convertible top relay for 1971-1976 Chevrolet Impala, Caprice and Pontiac Catalina. This relay has 6 prongs and mounts next to the convertible top motor. Your electrical wiring harness from the convertible top switch and...

Product#: 14914

1955-72 Buick, Chevy, Pontiac, Oldsmobile; Convertible Top Hose Retainer; Push In Style; Various Models

Reproduction of the original hose retainer clip designed for use with 1967-69 GM convertible models. Each clip is manufactured in stamped steel and heat treated for extra strength. This clip is designed to retain the...

Product#: 7614749

1949-75 GM, Dodge, Plymouth; Convertible Top Rear Window Binding End Clip, with Screw

OER reproduction of the original convertible top rear binding end clip used on most 1949-75 GM, Dodge, and Plymouth convertible models. This stainless steel end clip covers and finishes both ends of the rear window outer top...

Product#: 50502H

1964-2004 Ford, Mercury; Convertible Top Motor Pump Rubber Plug; Various Models

Reproduction of the original convertible top motor pump fill plug rubber bumper for use on 1965-2004 convertible Mustangs. The plug is manufactured in durable and reliable rubber material and replaced the worn out, cracked or...

Product#: C135551

1967-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Top Pivot Bushing; Serrated; with Square Hole; Each

Reproduction of the original convertible top piston lower bolt bushing designed for use with varius 1967-72 Buick, Chevrolet, Pontiac, Oldsmobile convertible models as listed. This bushing mounts from the rear control link of...

Product#: HK264

1963-64 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size; Convertible Top Cylinder; Each

Reproduction convertible top cylinder for 1963-64 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum casting, offering superior strength...

Product#: TF401133

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel; Passenger Side

Reproduction right hand drain channel for 1955-57 convertible models. Manufactured to factory specifications for a proper fit and appearance. This piece is installed below the rear pinchwelt, behind the rear seat.

Product#: C1000B

1967-69 Camaro, Firebird, 1968-72 Chevelle; Convertible Top Frame Pivot Bolt and Bushing Set

Reproduction of the rear control link bolt and bushing set designed for use with 1967-69 Chevrolet Camaro, Pontiac Firebird, and 1968-72 Chevrolet Chevelle convertible models. This complete set includes all required rear...

Product#: HK238

1963-64 Buick, Cadillac, Chevy, Pontiac, Oldsmobile, Full Size; Convertible Top Motor Pump Assembly; Universal Fit;

Reproduction convertible top motor & pump assembly designed to deliver reliable hydraulic pressure and dependable performance. This unit makes raising and lowering your power top smooth and efficient by replacing the worn or...

Product#: TF401132

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel; Drivers Side

Reproduction left hand drain channel for 1955-57 convertible models. Manufactured to factory specifications for a proper fit and appearance. This piece is installed below the rear pinchwelt, behind the rear seat.

Product#: TF400226

1955-57 Chevrolet Convertible Top 302 Piece Hardware Set

Complete nut, bolt, bushing and screw set to assemble convertible top frame. Instructions are included. One set required.

Product#: BK001

1955-57 Chevy Bel Air; Convertible Top Hydraulic System Bleeder Set

After replacing your convertible top, pump and hoses, be sure the system operates properly by bleeding all the air out of the hydraulic system. This comes with a filler plug adaptor fitting and complete instructions. Works...

Product#: 4634122

1954-64 GM; 1-Button Switch; Windows or Convertible Top

Single button switch for right front and either side rear door/quarter panel power windows on 1954-57 Cadillac. Also used as convertible top switch on 1956 Oldsmobile, 1957-59 Cadillac and 1959-62 Pontiac and other GM models...

Product#: TF401134

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel Reinforcement; Drivers Side

Reproduction drain channel reinforcement for 1955-57 convertible models. This piece helps support the drain channels for proper drainage.

Product#: TF401147

1955-57 Chevy Bel Air; Convertible Top Cylinder Bracket; Drivers Side

Reproduction top cylinder mounting bracket for 1955-57 models. This is mounted to the floor pan, and acts as the mounting point for the lower portion of the top cylinder. Mounting hardware included.

Product#: TF400225

1955-57 Chevrolet Convertible Top Plates

Reproduction convertible top plates for 1955-57 models. Feature correct chrome plating and contours. Mounting screws are included.

Product#: TF401135

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel Reinforcement; Passenger Side

Reproduction drain channel reinforcement for 1955-57 convertible models. This piece helps support the drain channels for proper drainage.

Product#: CRP001

1955-57 Convertible Top 18 Piece Pinch Rail Pad Set

Replace your old, compressed and hardened originals, these pads will make your top replacement more complete and better fitting. Mounts in trunk between the rear pinch rail and the body.

Product#: TF400222

1955-57 Convertible Top Hose Retainer Clip (Screw On Style)

Reproduction screw on style hose clip for 1955-57 convertible models.

Product#: TF401148

1955-57 Chevy Bel Air; Convertible Top Cylinder Bracket; Passenger Side

Reproduction top cylinder mounting bracket for 1955-57 models. This is mounted to the floor pan, and acts as the mounting point for the lower portion of the top cylinder. Mounting hardware included.

Product#: *HC62

1967-69 Camaro, Firebird; Convertible Tack Strip Bolt Set

Reproduction of the original style convertible tack strip bolts for use with 1967-69 Camaro & Firebird convertible models. This 17-piece set is designed to install the convertible tack strip. Features correct bolts with...

Product#: SB002

1969-70 Chevrolet, Buick, Oldsmobile, Pontiac; Convertible Top Cylinder Shoulder Bolts; Pair

Reproduction bumper jack storage mounts designed for use with 1955-57 Chevrolet full size models. These hard-to-find parts secure the bumper jack properly in the trunk, keeping it stable and in the correct factory location....

Product#: L21002P

1961-64 Impala; Convertible Top Pump/Motor Cover Shield

Replacement convertible top motor cover shield for 1961-64 Impala convertible models. This replacement cover is manufactured from a high quality stamped steel to factory specifications.

Product#: TF401191

1957 Chevy Bel Air; Convertible Top Switch Assembly

Reproduction convertible top switch assembly for 1957 convertible models. Manufactured to factory specifications, featuring the original style chrome knob with white lettering. Includes: Mounting bracket and retaining clips...