Product#: A909101

1993-02 Camaro, Firebird; Convertible Top Sail Panel Trim; Quarter Panel Upper Filler Applique; RH and LH; Pair

Reproduction upper filler applique set for the quarter panels at the folding top on 1993-02 Camaro and Firebird convertible models. This is the molding that mounts above the rear quarter panel just behind the door at glass...

Product#: ME12227

1970-71 Dodge Challenger; Convertible Top Boot Well Molding Set; w/Clips; 3 Piece Set

Reproduction of the original style moldings designed to install around the convertible well for 1970-71 Dodge Challenger models. This three piece molding set features the correct stainless finish with factory contours and can...

Product#: K847

1968-1969 Camaro, Firebird; Convertible Windshield Header Molding; Satin Painted Finish; RH and LH; Pair

Quality reproduction of the original windshield header molding set for use with 1968-69 Camaro and Firebird convertible models. Each molding is manufactured in high quality stamped steel and finished in bright polished chrome...

Product#: C2361

1967-69 Camaro, Firebird; Convertible Windshield Molding Set; 5 Piece Set

Reproduction windshield molding set for 1967-69 Camaro and Firebird convertible models. This complete windshield molding set is designed to replace all 5 windshield moldings including the upper windshield molding, RH and LH...

Product#: 14954

1989-92 Camaro, Firebird; Convertible Inner Header Molding; Black

Reproduction of the original inner header molding designed for use with 1989-92 Chevrolet Camaro and Firebird convertible models. Each molding is manufactured in quality injection-molded ABS replicating the original in...

Product#: G4598

1994-2002 Camaro/Firebird Convertible Center Drain Panel Molding

This 1994-2002 Camaro/Firebird Convertible Center Drain Panel Molding is a genuine GM replacement part. The base of the rear glass windshield for the convertible top fits within this channeled molding. The molding is...

Product#: 7614749

1949-75 GM, Dodge, Plymouth; Convertible Top Rear Window Binding End Clip, with Screw

OER reproduction of the original convertible top rear binding end clip used on most 1949-75 GM, Dodge, and Plymouth convertible models. This stainless steel end clip covers and finishes both ends of the rear window outer top...

Product#: 7678186

1967-69 Camaro, Firebird; Convertible Well Rain Gutter Molding

Reproduction of the original convertible well rain gutter designed for use with all 1967-69 Camaro and Firebird convertible models. This precision-molded gutter directs water away from the convertible well area to help...

Product#: K723

1967-69 Camaro, Firebird; Convertible Well Molding Set; Pair

Reproduction of the original convertible well molding designed for use on 1967-69 Camaro and Firebird models. Your original convertible well moldings probably took tremendous abuse, especially if a top boot was being...

Product#: K848

1967 Camaro, Firebird; Convertible Windshield Header Molding; Bright Chrome Finish; RH & LH; Pair

Quality reproduction of the original windshield header molding set for use with 1968-69 Camaro and Firebird convertible models. Each molding is manufactured in high quality stamped steel and finished in bright polished chrome...

Product#: 7648739

1967-69 Camaro, Firebird; Convertible Outer Pillar Post Molding; Chrome; LH Driver Side

Restore the exterior trim detail of your convertible with this quality reproduction outer pillar post molding for 1967-69 Camaro and Firebird models. Designed to replicate the original in both appearance and fit, this molding...

Product#: 7755256

1967-69 Camaro, Firebird; Convertible Tack Strip; Rear Tacking Rail; Trimstick; 3 Piece Set

Reproduction convertible top tack strip set for 1967-69 Camaro and Firebird convertible models. This rear tacking rail set is manufactured with a metal outer frame and hard rubber inner layer to accurately replicate the...

Product#: 7672609

1967-72 Buick, Chevy, Pontiac, Olds; Convertible Well Molding Clip; Each

Reproduction of the original stamped convertible well molding clip for use with various 1967-72 GM convertible models as listed. This clip is designed and manufactured to attach the rear convertible well chrome molding around...

Product#: 7648738

1967-69 Camaro, Firebird; Convertible Outer Pillar Post Molding; Chrome; RH Passenger Side

Restore the exterior trim detail of your convertible with this quality reproduction outer pillar post molding for 1967-69 Camaro and Firebird models. Designed to replicate the original in both appearance and fit, this molding...

Product#: *R314

1967-69 Camaro / Firebird Convertible Header Molding Screw Set

Reproduction convertible header molding screw set for 1967-69 Camaro Convertible models. Set includes 5-pieces.

Product#: G4600

1994-2002 Camaro/Firebird Convertible Side Drain Panel Molding - LH

This 1994-2002 Camaro/Firebird Convertible Side Drain Panel Molding, LH (left hand - driver's) side is a genuine GM original replacement part. The black injection molded plastic component is the rear trunk trim panel. It sits...

Product#: G4601

1994-2002 Camaro/Firebird Convertible Inner Splash Shield - RH

This 1994-2002 Camaro/Firebird Convertible Inner Splash Shield for the RH (right hand) side is a genuine GM replacement that is an exact duplicate of the component that originally came on your Camaro or Firebird convertible....

Product#: G4599

1994-2002 Camaro/Firebird Convertible Side Drain Panel Molding - RH

This 1994-2002 Camaro/Firebird Convertible Side Drain Panel Molding, RH (right hand - driver's) side is a genuine GM original replacement part. The black injection molded plastic component is the rear trunk trim panel. It...

Product#: G4602

1994-2002 Camaro/Firebird Convertible Inner Splash Shield - LH

This 1994-2002 Camaro/Firebird Convertible Inner Splash Shield for the LH (left hand) side is a genuine GM replacement that is an exact duplicate of the component that originally came on your Camaro or Firebird convertible....

Product#: HB5960

1959-60 Impala, LeSabre, Electra, Eldorado; Convertible Top Header Bow; Various Models

Reproduction convertible top header bow for various 1959-60 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac B-body full size models. Each header bow is manufactured to factory specifications, replicating the original in...

Product#: 395611

1967-69 Camaro, Firebird; Windshield Side Molding; Convertible; Drivers Side

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Product#: 423A20

1964-66 Mustang; Convertible Top Boot Center Rear Molding

Reproduction rear top boot molding for 1965-66 convertible Mustangs. This is the center rear chrome molding that the boot snap studs attach to. Attaches to the back edge of the well. When your top is in the down position,...

Product#: 395601

1967-69 Camaro, Firebird; Windshield Side Molding; Convertible; Passenger Side

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Product#: 03606A

1964-67 Mustang; Convertible Inner Header Molding; Stainless Steel

This beautiful reproduction of the 1964-67 Mustang convertible header molding is manufactured in stainless steel to original factory dimensions for an authentic appearance and fit. Features all the correct mounting holes for...

Product#: 41700D

1971-73 Ford Mustang, Mercury Cougar; Convertible Top Rear Tacking Strip Set; 3-Piece Set

Reproduction convertible rear tack strip that mounts under the rear panel behind the window. This strip holds the convertible top, rear window and well liner to the body. Manufactured from factory grade metal, each strip...

Product#: 54676A

1965-68 Mustang; Convertible Top Boot; Front Retainer

Reproduction of the original top boot retainer designed for use on 1965-68 Mustang convertibles. Designed to hold the top boot in place. Mounts behind the back seat and connects to the well liner. Each retainer is manufacted...

Product#: ME12228

1970-71 Challenger, Barracuda, Cuda; Convertible Boot Well Molding Hardware Set

Correct reproduction of the original convertible boot well molding hardware for use with 1970-71 Dodge Challanger, and Plymouth Barracuda and Cuda models. Mount your Challenger or Barracuda convertible boot well molding set...

Product#: 423A18C

1965-66 Mustang; Convertible Top Boot Side Moldings; Chrome

Reproduction of the original corner chrome molding (hockey stick) that the boot snap studs attach to. The top side chrome holds your top boot in place when your top is in the down position. Attaches to the rear corner and...

Product#: 50412-CM

1963-73 Ford/Mercury; Various Models; Convertible Top Rail Bushing

Convertible top rail to cylinder nylon bushing for a variety of Ford and Mercury convertible applications including 1964-73 Mustang as well as other models. 4 required per vehicle. Sold individually. Ford Applications:...

Product#: 41700C

1969-70 Ford Mustang, Mercury Cougar Convertible; Rear Tach Strip Set; Tacking Rail; Trimstick; 3-Piece Set

Reproduction convertible rear tack strip that mounts under the rear panel behind the window. This strip holds the convertible top, rear window and well liner to the body. Manufactured from factory grade metal, each strip...

Product#: 41700E

1964-65 Ford Mustang; Convertible Top Rear Tack Strip Set; 3-Pieces; (1964-65 early production models with short style outer tack strips)

Reproduction tack strip (aka tacking rail) that mounts under the rear panel behind the rear window to hold the convertible top, rear window and well liner to the body. Manufactured from factory grade metal and features a...

Product#: 41700A

1965-66 Mustang; Convertible Top Rear Tack Strip Set; 3 Pieces; (Late production 1965-66 Models with long style outer tack strips)

Reproduction convertible rear tack strip that mounts under the rear panel behind the window. This strip holds the convertible top, rear window and well liner to the body. Manufactured from factory grade metal, each strip...

Product#: 03606C

1968 Mustang; Convertible Windshield Header Molding; Polished Stainless

Reproduction of the original convertible top windshield header molding designed for use with 1968 Mustang convertible models. Each molding is manufactured in highly polished stainless steel for an authentic appearance. Mounts...

Product#: CV1726Z

1968-72 Skylark, Chevelle, Cutlass, GTO, LeMans,1968-70 Tempest; Convertible Top Rain Gutter

Reproduction convertible well rain gutter for 1968-72 Chevelle, Cutlass, Skylark, GTO, LeMans, and Tempest convertible models. This molded gutter assembly is engineered to channel water away from the rear convertible well...

Product#: 85L225

1987-93 Ford Mustang; Convertible Top Belt Molding; Upper; LH

Exact reproduction of the original convertible upper top corner well molding designed for use on 1987-93 convertible models. This molding runs around the rear of the convertible top from the rear of the door jam to just...

Product#: HK95

1965-66 Mustang Rear Valance Mounting Screws, Well Liner Mounting Screw Kit

1965-66 Mustang well liner screws mount the well liner into place. The well liner prevents your convertible top from getting damaged when you raise or lower the top. The same black flat head screw is also used to mount the...

Product#: 85L224

1987-93 Ford Mustang; Convertible Top Belt Molding; Upper; RH

Exact reproduction of the original convertible upper top corner well molding designed for use on 1987-93 convertible models. This molding runs around the rear of the convertible top from the rear of the door jam to just...

Product#: HK407

1971-73 Mustang Convretible 9 Piece Windshield Molding Clip Kit

When replacing the windshield moldings it's a good idea to replace the clips. This is a reproduction set of the original clips used to attach the front windshield moldings on 1971-73 Convertible models.

Product#: TST567501

1956-1975 Chevrolet Corvette; Black; Top Straps

Black convertible top straps designed for the 1956-57 Chevrolet Corvette by Al Knoch are made to factory original specifications and proudly made in the U.S.A..

Product#: A9083

1958 Impala / Full Size Hardtop & Convertible Weatherstrip Channel Gutter

Reproduction of the trunk weatherstrip channel gutter that attaches to the rear body panel.

Product#: 54676B

1969-70 Ford Mustang; Convertible Top Boot; Front Retainer; 7 Holes

Reproduction of the original top boot retainer designed for use on 1969-70 Mustang convertibles. Designed to hold the top boot in place. Mounts behind the back seat and connects to the well liner. Each retainer is manufacted...

Product#: 41700B

1967-68 Ford Mustang; Convertible Rear Tacking Strip Bow Set; 3 Pieces

OEM style reproduction tacking strip (aka tack bow) that mounts under the rear panel behind the rear window to hold the convertible top, rear window and well liner to the body. Manufactured from factory grade metal and...

Product#: TF400016

1955-57 Chevrolet Bel Air; Convertible Windshield Header Moldings; Polished Stainless Steel; LH and RH

Reproduction of the original convertible windshield header moldings designed for use with 1955-57 Chevrolet Bel Air convertible models. Complete with cutouts for the sun visor brackets and the convertible top latches....

Product#: 85L226

1987-93 Ford Mustang; Convertible Top Belt Molding; Lower; RH

This molding is the piece that fits between the upper plastic molding and the actual body of the car and acts as a "gasket" to help seal the body and protect the upper molding from rubbing against the body of the car. Made...

Product#: 85L227

1987-93 Ford Mustang; Convertible Top Belt Molding; Lower; LH

This molding is the piece that fits between the upper plastic molding and the actual body of the car and acts as a "gasket" to help seal the body and protect the upper molding from rubbing against the body of the car. Made...

Product#: 85L223

1983-93 Ford Mustang; Convertible Top Back Belt Lower Rubber Seal

Reproduction of the original convertible top center boot well seal molding designed for use under the rear center belt molding for 1983-93 convertible models. This seal is the strip that fits between the upper plastic molding...

Product#: 85L020

1983-86 Ford Mustang; Convertible Top Upper Belt Molding; RH

Reproduction of the original convertible top upper belt molding. Each molding is manufactured from original Ford tooling offering the best possible replacement for your 1983-86 convertible Mustang. Includes metal studs making...

Product#: 85L021

1983-86 Ford Mustang; Convertible Top Upper Belt Molding; LH

Reproduction of the original convertible top upper belt molding. Each molding is manufactured from original Ford tooling offering the best possible replacement for your 1983-86 convertible Mustang. Includes metal studs making...

Product#: 85L232

1983-86 Ford Mustang; Convertible; Quarter Window Belt Moldings

Replace your weathered or cracked or missing quarter window belt moldings with this reproduction set for for 1983-1986 Mustang Convertible. Must be used with the outer window belt weatherstripping, see part# 85L036.

Product#: 432A18E

1971-73 Ford Mustang; Convertible Boot Side Moldings

New reproduction convertible boot molding for 1971-73 Ford Mustang vehicles. Replace your old, damaged or missing molding with our reproductions. Our boot moldings are made to exact factory specifications for a clean and...

Product#: MP41272

1964-66 Dodge Dart; Convertible Top Transition Moldings; LH Drivers Side

Reproduction of the original style convertible top transition molding designed for use with Dodge Dart convertible models. This transition molding mounts on the rear of the quarter panel next to the trunk lid. Manufactured in...

Product#: CM5375

1969-76 Corvette; Windshield Header Corners; Pair; Made in the USA; GM Licensed

Reproduction of the complete windshield header corners designed for use with 1969-76 Chevrolet Corvette models. Each corner molding is manufactured to factory specifications featuring a highly polished chrome finish...

Product#: CM5375B

1969-76 Corvette; Windshield Header Corner Bushings; Pair; Made in the USA

Reproduction of the original windshield header corner bushings designed for use with1969-76 Chevrolet Corvette models. Includes the RH and LH bushings. Replaces original GM part numbers # 3966601, 3966602. Sold in pairs.

Product#: Y1134

1968-75 Corvette; Convertible Deck Lid Bezel

Reproduction 1968-75 Convertible Deck Lid Bezel for Corvette models

Product#: Y9508

1961-1962 Chevrolet Corvette; White; Wire On Strip Staple Cover

White wire on the 1960 Chevrolet Corvette, offering a stylish alternative. Manufactured by Al Knoch to factory original specifications and proudly made in the U.S.A.

Product#: Y9507

1961-1962 Chevrolet Corvette; Black; Wire On Strip Staple Cover

Black wire on the 1960 Chevrolet Corvette, suitable for a sleek look. Manufactured by Al Knoch to factory original specifications and proudly made in the U.S.A.

Product#: TPD566201

1956-1962 Chevrolet Corvette; Black; Top Pads

Black convertible top pads specifically designed for the 1956-57 Chevrolet Corvette by Al Knoch are made to factory original specifications and proudly made in the U.S.A..

Product#: HUS566201

1956-1962 Chevrolet Corvette; Black; Convertible Top Rear Hold up Straps

Pair of black rear hold-up straps for the 1956-1957 Chevrolet Corvette by Al Knoch are made to factory original specifications and proudly made in the U.S.A..

Product#: MP41233

1966 Dodge Dart; Convertible Top Transition Molding; w/o Top Door Edge Moldings; RH Passenger Side

Reproduction of the original convertible transition molding designed for use with 1966 Dodge Dart models. This transition molding mounts on the quarter panels of convertible vehicles by the quarter window glass (front). For...

Product#: 27620-BBLP

1959-60 Chevrolet Corvette; Hardtop Receiver Molding Rubber Inserts

Hardtop Receiver Molding Rubber Inserts for 1959-1960 Chevrolet Corvette. From restoration to performance, we are proud to offer the highest quality parts for both classic and late models Corvettes.