Product#: DS756

1967-70 Impala/Full Size Passenger Car; Center Link

Reproduction drag link/center link for 1967-70 Chevrolet Impala/full size models as listed. Includes hardware. Full ball stud pitman arm end, greaseable, self aligning no bind design, low friction, and ready to install....

Product#: K8243A

1960-76 Mopar; Alignment Caster / Camber Cam Bolt Kit

Adjustable eccentric camber alignment bolt kit for 1960-76 Mopar A, B, and E-body vehicles. This kit includes all the bolts, washers, and nuts required to install and align one upper control arm. They will allow up to 2-1/4...

Product#: DS780

1971-72 GM Full Size Passenger Car; Center Link

Reproduction drag link/center link for 1971-72 Chevrolet Impala and various other GM full size models as listed. Includes hardware. Full ball stud pitman arm end, greaseable, self aligning no bind design, low friction, and...

Product#: 154101

1965-74 Impala, Camaro, Nova, Truck;Tie Rod Adjusting Sleeve, with Clamps, OE Type, LH or RH; Each

Technically correct in appearance with original factory installed component. OE quality reproduction from Classic Suspensions. Manufactured by an OE supplier to modern technical specifications while offering restorers an...

Product#: LCUK63725

1963-72 Chevy Truck - Front - Control Arm U-bolts 1/2"

Replace your worn or rusty cross shaft bolts with these hard to find 1/2" U-bolts. OEM quality includes stover lock nuts.

Product#: 154102

1967-74 Camaro, Nova, Firebird, X-Body; Outer Tie Rod, LH or RH; Correct Reproduction

Reproduction of the original outer tie rod designed for use with various 1967-74 models as listed below. Correct in appearance with original factory installed components. High quality new reproduction outer tie rod from...

Product#: 154103

1964-80 Buick, Chevy, Olds, Pontiac; Inner Tie Rod; LH or RH, OE Design; Various Models

Correct in appearance with original factory installed components. High quality new reproduction inner tie rod from Classic Suspensions. Manufactured by an OE supplier to modern technical and safety specifications while...

Product#: DS809

1973-76 Impala / GM Full Size Steering Center Link

Reproduction drag link for 1973-76 Chevrolet Impala and full size models. Includes hardware. Ready to install. This center link is made of hot-forged alloy steel for superior strength and is coated to help provide rust...

Product#: 3790331

1963-96 Chevrolet Corvette; Strut Rod Camber Bolt Kit

This Corvette replacement rear strut rod adjustment kit has been manufactured to meet or exceed factory specifications and performance. The fit and function works perfectly.

Product#: LCUK63728

1963-72 Chevrolet C10, C20, C30, Blazer, GMC C15; Front Lower Control Arm U-bolts w/Seats; 1/2"

Replace worn or damaged front lower control arm mounting hardware with this U-bolt and seat kit designed for 1963-1972 Chevrolet C10, C20, C30, Blazer, and GMC C15 trucks. Manufactured for proper fit and secure suspension...

Product#: SKY9200

Skyjacker Dual Steering Stabilizer Kit

Skyjacker Steering stabilizers are engineered to restrain bump steering and front-end vibration. Kit comes complete with all necessary brackets, hardware and polyurethane boot to protect against on-road and off-road elements.

Product#: 3468B

1966-67 Falcon, Fairlane, Ranchero, Comet. 1967 Mustang; Lower Control Arm Strut Rod; 6 & 8 Cylinder; LH or RH; Each

Reproduction of the original strut rod designed for use on 1966-67 6 cylinder or V-8 Falcons, Comets, and 1967 Mustangs. The strut rod is important as it secures the front lower control arm to the frame. For use on driver...

Product#: K7103B

1960-76 Mopar Offset Upper Control Arm Bushing Kit - - Pair

Restorer's Choice™ premium eccentric upper control arm bushing kit for 19660-76 Mopar A, B, E-body models. These bushings feature offset sleeves that provide additional camber adjustment. They are manufactured from high...

Product#: SR28K

1963-82 Chevrolet Corvette; Van Steel Rear Cam Eliminator 3 Hole Adjustable

Van Steel's rear cam eliminator kit for 1963-1996 Chevrolet Corvette's. Cam Eliminator kit solid mounts your inner strut rod bracket and replaced the factory eccentric bolts so there is no need to worry about the eccentrics...

Product#: ST09BSK

1963-82 Chevrolet Corvette; Van Steel Bump Steer Kit

OVan Steel bump steer kit for 1963-1982 Chevrolet Corvette's feature PTFE lined FK Rod ends inboard and outboard. These rod ends are low friction, eliminate bushing deflection and smooth articulation. The rod ends are self...

Product#: 154104

1967 Idler Arm, OE Type

Correct in appearance with original factory installed components. High quality new reproduction idler arm from Classic Suspensions. Manufactured by an OE supplier to modern technical and safety specifications while offering...

Product#: TC3002T

1964-66 Mustang Front Coilover Conversion Double Adjusatble

Front UCA Coilover Bolt-In UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Double Adjustable Valving Quickset 2 Billet Coil-Overs, Slightly Lowered Ride Height Upper Chassis...

Product#: TC3002Q

1964-66 Mustang Front Coilover Conversion Double Adjusatble

Front Bolt-On SS Coil-Over, Factory Valved - Fits 1964-66 Mustang and various Ford/Mercury models from 1960-77 - Complete kit contains factory-valved shocks, springs, tower adapters with reinforcement plate, mounting...

Product#: TC3001A

1964-66 Ford Mustang A-Arm Core System

A-Arm Core System Mustang 64-66 Contains Dropped Pivot Shaft Upper Control Arm with Shock Tabs, Lower Control Arms & Strut Rods.Fitment: 1960-65 Comet 1964-65 Cyclone 1960-65 Falcon 1964-66 Mustang 1960-65 Ranchero

Product#: TC3001D

1964-66 Ford Mustang A-Arm Air Core System Single Adjustable

1965-66 Mustang front air spring system with quickset Single Adjustable air shocks and a 1? drop shaft If you are ready to take your Mustang to the next level in suspension, control, handling and ride quality, pay attention...

Product#: TC3001E

1964-66 Ford Mustang A-Arm Air Core System Dual Adjustable

1965-66 Mustang front air spring system with quickset Double Adjustable air shocks and a 1? drop shaft If you are ready to take your Mustang to the next level in suspension, control, handling and ride quality, pay attention...

Product#: 37509-BBLP

1963-69 Chevrolet Corvette; Rear Alignment Shims Stainless Steel 18PC

Rear Alignment Shims Stainless Steel 18PC for 1963-1969 Chevrolet Corvette. From restoration to performance, we are proud to offer the highest quality parts for both classic and late models Corvettes. Note: Includes:...

Product#: FS9296CB

1992-96 Chevrolet Corvette; Van Steel Front Camber Brace; LT1 & LT4 Engine; Curved Bar

Van Steel front camber brace kit for 1992-1996 LT1 equipped Chevrolet Corvette. The Front Camber Brace is designed specifically for the 1992-96 with the LT1 Motor. The concept of the Camber Brace is to structurally connect...

Product#: 3468C

1968-77 Ford / Mercury Right Lower Arm Strut Rod - Mustang / Falcon / Cougar / Comet - 6-cylinder/V8

Reproduction passenger side strut rod for 1968-77 Mustang, Falcon, Cougar, and Comet models. The strut rod controls the forward and backward movement of the lower control arm. It is connected between the low control arm and...

Product#: 3468A

1964-66 Mustang, Falcon, Comet; Lower Control Arm Strut Rod; 6 & 8 Cylinder; RH or LH; Each

Replacement strut rod for 1964-66 6 cylinder or V-8 Mustangs, Falcons, and Comets. The strut rod is important as it secures the front lower control arm to the frame. Fits driver side or passenger side. Sold individually. 2...

Product#: TC3468A

1960-66 Ford Strut Rods 17-15/16" Inline

Our newly redesigned strut rod makes improvements in the areas of performance, serviceability, and ease of installation. The key to these refinements is our billet concentric pivot assembly; the first of its kind. A set of...

Product#: TC3001N

1964-65 Ford A-Arm Core Single Adjustable

The TCP front coil-over conversion is a fully single adjustable suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and testing,...

Product#: TC3001P

1964-65 Ford A-Arm Core Double Adjustable

The TCP front coil-over conversion is a fully double adjustable suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and testing,...

Product#: TC3002C

1964-66 Ford Mustang A-Arm Core System Fixed Valving

The TCP front coil-spring suspension is a fully adjustable fixed valving suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and...

Product#: TC3002M

1964-66 Mustang Front Coilover Conversion Static Valving

Front Bolt-On SS Coil-Over, Factory Valved - Fits 1964-66 Mustang and various Ford/Mercury models from 1960-77 - Complete kit contains factory-valved shocks, springs, tower adapters with reinforcement plate, mounting...

Product#: TC3002G

1964-66 Mustang Front Air Spring Conversion Single Adjusatble

Front Bolt-On Air-Spring, Single Adjustable - Fits 1964-66 Mustang - Complete kit contains adjustable-valve air-spring shocks, tower adapters with reinforcement plate, mounting hardware, spot weld removal tool, and choice of...

Product#: TC3002H

1964-66 Mustang Front Air Spring Conversion Double Adjusatble

Front Bolt-On Air-Spring, Double Adjustable - Fits 1964-66 Mustang - Complete kit contains adjustable-valve air-spring shocks, tower adapters with reinforcement plate, mounting hardware, spot weld removal tool, and choice of...

Product#: TC3002R

1964-66 Mustang Front Coilover Conversion Double Adjusatble

Front UCA Coilover Bolt-In 64-66 Mustang UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Double Adjustable Valving Quickset 2 Billet Coil-Overs, Slightly Lowered Ride Height...

Product#: TC3002P

1964-66 Mustang Front Coilover Conversion Single Adjusatble

Front Bolt-On SS Coil-Over, Factory Valved - Fits 1964-66 Mustang and various Ford/Mercury models from 1960-77 - Complete kit contains factory-valved shocks, springs, tower adapters with reinforcement plate, mounting...

Product#: TC3002W

1967-73 Mustang Front Coilover Conversion Static Valving Big Block Max

Front UCA Coilover Bolt-In UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Double Adjustable Valving Quickset 2 Billet Coil-Overs, Maximum Lowered Ride Height Upper Chassis...

Product#: TC3002X

1967-73 Mustang Front Coilover Conversion Static Valving Small Block Max

Front UCA Coilover Bolt-In UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Double Adjustable Valving Quickset 2 Billet Coil-Overs, Maximum Lowered Ride Height Upper Chassis...

Product#: TC3003B

1967-73 Mustang Front Coilover Conversion Single Adj Small Block Max

Front UCA C/O Q1 ML BB M20 Bolt-In 67-73 Mustang UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Single Adjustable Valving Quickset 1 Billet Coil-Overs, Maximum Lowered Ride...

Product#: TC3003H

1967-73 Mustang Front Coilover Conversion Single Adj Big Block Max

Front UCA C/O Q1 ML BB M20 Bolt-In 67-73 Mustang UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Single Adjustable Valving Quickset 1 Billet Coil-Overs, Maximum Lowered Ride...

Product#: FS8489CB

1984-89 Chevrolet Corvette; Van Steel Front Camber Brace; L98 Engine; Straight Bar

Van Steel front camber brace kit for 1984-1989 L98 equipped Chevrolet Corvette. The Front Camber Brace is designed specifically for the 1984-89 Corvette with the L98 engine Motor. The concept of the Camber Brace is to...

Product#: TC3001F

1967 Ford Mustang A-Arm Air Core System Single Adjustable

1967 Mustang front air spring system with quickset Single Adjustable air shocks and a 1? drop shaft If you are ready to take your Mustang to the next level in suspension, control, handling and ride quality, pay attention...

Product#: TC3001G

1967 Ford Mustang A-Arm Air Core System Double Adjustable

1967 Mustang front air spring system with quickset Double Adjustable air shocks and a 1? drop shaft If you are ready to take your Mustang to the next level in suspension, control, handling and ride quality, pay attention...

Product#: TC3001R

1966-67 Ford A-Arm Core Single Adjustable Big Block

The TCP front coil-over conversion is a fully single adjustable big block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and...

Product#: TC3001Q

1966-67 Ford A-Arm Core Single Adjustable Small Block

The TCP front coil-over conversion is a fully single adjustable small Block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3001T

1966-67 Ford A-Arm Core Double Adjustable Small Block

The TCP front coil-over conversion is a fully double adjustable small block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3001U

1966-67 Ford A-Arm Core Double Adjustable Big Block

The TCP front coil-over conversion is a fully double adjustable big block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and...

Product#: TC3003G

1967 Ford Mustang A-Arm Core System

A-arm core system mustang 67 contains dropped pivot shaft upper control arm with shock tabs, lower control arms, eccentric eliminator & strut rods.Fitment:1966-67 Comet 1967 Cougar1966-67 Cyclone1966-67 Fairlane1966-67...

Product#: 3468E

1968-77 Ford / Mercury Left Lower Arm Strut Rod - Mustang / Falcon / Cougar / Comet - 6-cylinder/V8

Reproduction driver side strut rod for 1968-77 Mustang, Falcon, Cougar, and Comet models. The strut rod controls the forward and backward movement of the lower control arm. It is connected between the low control arm and the...

Product#: TC3001C

1968-73 Ford Mustang A-Arm Core System

A-Arm core system 1968-73 Mustang contains dropped pivot shaft upper control arm with shock tabs, lower control arms, eccentric eliminator & strut Rods.Fitment: 1966-67 Comet 1967 Cougar1971?77 Comet1968-73 Cougar1968-71...

Product#: TC3001J

1968-73 Ford Mustang A-Arm Air Core System Double Adjustable

Converting the stock front suspension of your 1968 to 1977 Ford/Mercury to double adjustable air suspension is now a simple bolt-on procedure. Our exclusive modular shock-tower-adapter system and spherical-stem assembly can...

Product#: TC3001H

1968-73 Ford Mustang A-Arm Air Core System Single Adjustable

Converting the stock front suspension of your 1968 to 1977 Ford/Mercury to single adjustable air suspension is now a simple bolt-on procedure. Our exclusive modular shock-tower-adapter system and spherical-stem assembly can...

Product#: TC3001Y

1968-73 Ford A-Arm Core Double Adjustable Big Block

The TCP front coil-over conversion is a fully double adjustable small block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3001V

1968-73 Ford A-Arm Core Single Adjustable Small Block

The TCP front coil-over conversion is a fully small adjustable single block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3001X

1968-73 Ford A-Arm Core Double Adjustable Small Block

The TCP front coil-over conversion is a fully double adjustable small block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3001W

1968-73 Ford A-Arm Core Single Adjustable Big Block

The TCP front coil-over conversion is a fully double adjustable single block suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development...

Product#: TC3002N

1964-66 Mustang Front Coilover Conversion Static Valving

Front Bolt-On SS Coil-Over, Factory Valved - Fits 1964-66 Mustang and various Ford/Mercury models from 1960-77 - Complete kit contains factory-valved shocks, springs, tower adapters with reinforcement plate, mounting...

Product#: TC3002Y

1967-73 Mustang Front Coilover Conversion Single Adj Big Block Min

Front UCA C/O Q1 SL BB M20 Bolt-In 67-73 Mustang UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Single Adjustable Valving Quickset 1 Billet Coil-Overs, Slightly Lowered Ride...

Product#: TC3002B

1960-65 Ford A-Arm Core System Fixed Valving

The TCP front coil-spring suspension is a fully adjustable fixed valving suspension system that utilizes the key factory mounting locations to greatly simplify installation. With over 20 years of production, development and...

Product#: TC3002K

1967-73 Mustang Front Air Spring Conversion Double Adjusatble

Front Bolt-On Air-Spring, Double Adjustable - Fits 1967-73 Mustang - Complete kit contains adjustable-valve air-spring shocks, tower adapters with reinforcement plate, mounting hardware, spot weld removal tool, and choice of...

Product#: TC3002J

1967-73 Mustang Front Air Spring Conversion Single Adjusatble

Front Bolt-On Air-Spring, Single Adjustable - Fits 1967-73 Mustang - Complete kit contains adjustable-valve air-spring shocks, tower adapters with reinforcement plate, mounting hardware, spot weld removal tool, and choice of...

Product#: TC3002U

1967-73 Mustang Front Coilover Conversion Static Valving Big Block Min

Front UCA Coilover Bolt-In UCA Coil-Over Conversion, Use with OEM or TCP Coil Spring Upper Control Arms, Contains Varishock Double Adjustable Valving Quickset 2 Billet Coil-Overs, Slightly Lowered Ride Height Upper Chassis...