Mallory; Distributor Points; Standard
Ignition points for all 23, 24, 25 26 and 27 series Mallory breaker point distributors.
1974-87 Ford / Mercury; 351M/400 & 429/460 BBF V8; DuraSpark Electronic Distributor; New
New, not remanufactured, Dura-Spark electronic ignition distributor for various 1974-87 Ford and Mercury models with 351M/400 or 460 BBF engines. These premium quality distributors 100% tested for fit, function, and...
1974-87 Ford / Mercury; 351M/400 & 429/460 BBF V8; DuraSpark Electronic Distributor; New
Classic $102.99 ea
Ford 240/300 Straight-6; DuraSpark Electronic Ignition Conversion
Ford Dura-Spark electronic ignition conversion kit for any 240/300 cid straight-6 Ford powered vehicle with a points type distributor. This kit includes all new, OE quality components for reliable fit and performance. The...
Ford 240/300 Straight-6; DuraSpark Electronic Ignition Conversion
Classic $235.99 kit
1975-82 GM; Ignition Wire Grommet; 4 Hole; With Slits
Reproduction 4-hole igniton wire grommet for various 1975-82 Buick, Chevrolet, Pontiac, and Oldsmobile models. Features convenient slits so it can be installed on each plug wire without removing or replacing the wire end. Can...
Accel; 1955-74; Chrome; 42,000 Volt; 1.4 Ohm Primary; Superstock Ignition Coil; Points
Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breaker point ignition
Accel; 1955-74; Chrome; 42,000 Volt; 1.4 Ohm Primary; Superstock Ignition Coil; Points
Classic $53.99 ea
4 Piece 6" x 1-1/2" Spark Plug Wire Heat Shield Set
This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...
Natural 4 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Vacuum Advance Cover; Chrome Plated Steel
Chrome plated steel cover that slides over factory vacuum advance units. Attaches with double sided tape. Fits most classic vaccum advance distributors.
Mallory; Distributor Cap; For 23, 24, 25, 26, 27 And 37 Series Distributors
Replacement distributor cap for Mallory Unilite distributors. Fits 23, 24, 25, 26, 27 and 37 Series. Mallory Heavy-Duty cap is constructed of top quality material and designed to fit your application for long lasting...
Mallory; Distributor Cap; For 23, 24, 25, 26, 27 And 37 Series Distributors
Classic $41.99 ea
Dress your engine with this all chrome coil cover. Fits most early model coils. Includes cover and attaching bracket. For use with small block engines.
Blue 4 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Red 4 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
2 Piece 6" x 1-1/2" Spark Plug Wire Heat Shield Set
This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...
Black 4 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Black 6 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Red 6 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Blue 6 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Silver 6 Piece Cool-It Plug Wire Sleeve Set
These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...
Spark Plug Deluxe Wire Separator Set; Blue
This set of spark plug wire separators is made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk. Includes two 4-wire separators, two 3-wire separators, and two 2-wire separators
Chrome 4 Hole 5-1/4" High Lift Wire Looms - Pair
Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.
Alter Ego 812 Series; Insulated Billet Aluminum Line Clamp; 4 Hole/Separator; 3/16" to 3/8"
Alter Ego 812 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...
Ford/Mercury; 260/289/302 SBF V8; DuraSpark Electronic Ignition Conversion; Cast Iron Gear
Ford Dura-Spark electronic ignition conversion kit for any small block Ford powered vehicle with a points type distributor. This kit includes all new, OE quality components for reliable fit and performance. The advantages of...
Ford/Mercury; 260/289/302 SBF V8; DuraSpark Electronic Ignition Conversion; Cast Iron Gear
Classic $242.99 kit
1955-07 GM V8 Distributor Gasket
Distributor gasket for various 1955-07 GM 8 cylinder models. Seals the distributor base to the engine block.
Ford/Mercury; 260/289/302 SBF V8; DuraSpark Electronic Ignition Conversion; Steel Gear
Ford Dura-Spark electronic ignition conversion kit for any small block Ford powered vehicle with a points type distributor. This kit includes all new, OE quality components for reliable fit and performance. The advantages of...
Ford/Mercury; 260/289/302 SBF V8; DuraSpark Electronic Ignition Conversion; Steel Gear
Classic $267.99 kit
1962-74 Ford / Mercury 289/302 SBF Single Vacuum Points Type Distributor - Mustang / Falcon / Truck
New, not remanufactured, single vacuum points-type ignition distributor for various 1962-74 Ford and Mercury models. Applications include Mustang, Falcon, Cougar, and F-Series Trucks with 260, 289, and 302 cid engines. These...
1962-74 Ford / Mercury 289/302 SBF Single Vacuum Points Type Distributor - Mustang / Falcon / Truck
Classic $87.99 ea
1962-74 GM; Ignition Distributor Vacuum Advance
A primary component of your vehicle's ignition system is the vacuum advance. The vacuum advance is a mechanism attached to the distributor which moves the breaker point or pickup coil plate when it receives vacuum generated...
Ford/Mercury; 360/390/427 FE V8; DuraSpark Electronic Ignition Conversion; Cast Iron Gear
Ford Dura-Spark electronic ignition conversion kit for any FE block Ford powered vehicle with a points type distributor. This kit includes all new, OE quality components for reliable fit and performance. The advantages of...
1967-81 Firebird; Pontiac V8; HEI Ignition Distributor; Red Cap
This distributor is an inexpensive replacement for your worn out factory distributor and perfect for upgrading to electronic ignition. They are made from 100% new parts and include a high quality distributor cap and rotor...
1975-83 Ford / Mercury; Connector; DuraSpark 2/3-Pin Ignition Control Module; Mustang, Bronco, F150
DuraSpark ignition control module 2/3-pin connector for various 1975-83 Ford and Mercury models including Mustang, Bronco, and F-Series trucks. This OEM style 2-wire pigtail will plug directly onto the OE-style Duraspark...
1975-83 Ford / Mercury; Connector; DuraSpark 2/3-Pin Ignition Control Module; Mustang, Bronco, F150
Classic $14.99 ea
Blue 6-Piece Taylor Clamp-Style 10.4MM Wire Separator Set
Organize your engine bay with Taylor clamp style wire separators. Manufactured from non-conductive type 6/6 nylon that won't melt, distort, fade or crack. Each six piece set includes two 4 wire separators, two 3 wire...
Standard Ignition Spark Plug Wire Set; 6 Cylinder
Spark plug wires are a major component in the vehicles ignition system. Electrical failure can be greatly hastened by loose connections at the ignition coil(s), distributor or spark plugs causing telltale corrosion at...
1955-67 Chevrolet Ignition Coil Ballast Resistor; Replacement Style; 1.8 Ohms
Replacement ignition coil resistor for 1955-67 Chevrolet models. For ignition systems that require a 1.8 ohm ignition coil resistor. TRUCKS 1955-59 W/12 VOLT SYSTEM 1960-66 W/DUAL REAR WHEELS FULL SIZE 1955-58 W/12 VOLT...
1955-67 Chevrolet Ignition Coil Ballast Resistor; Replacement Style; 1.8 Ohms
Classic $8.99 ea
1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Chrome
Distributor bolt for Chevy big block or small block engines. Each hex head cap screw bolt is made in the USA with steel, chrome plated, and polished to perfection.
1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Chrome
Classic $4.99 ea
Accel; 1974-87; 4-Prong Ignition Control Module; For Factory GM Distributor
If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability.
Accel; 1974-87; 4-Prong Ignition Control Module; For Factory GM Distributor
Classic $60.99 ea
1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Stainless
Distributor bolt for Chevy big block or small block engines. Each hex head cap screw bolt is made in the USA in stainless steel and polished to perfection.
1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Stainless
Classic $6.99 ea
1955-89 GM 8 Cylinder; Distributor Gear
Distributor Gear & Pin Kit for a wide variety of Chevrolet small block engines. This gear assembly was common with all V-8 Chevrolet engines between 1964 and 1989. OE Part Number: GENERAL MOTORS 1961198 GENERAL MOTORS 1958599...
1962-74 Mopar V8 Distributor Cap - Tan
Original-style replacement distributor cap for the cap originally equipped on Chrysler engines of the late 60's and early 70's. This distributor cap is manufactured in tan material. For models with single point distributors....
1962-72 Dodge, Plymouth; Ignition Coil Ballast Resistor
Factory style replacement Ballast Resistor for 1962-72 Mopar models. This replacement is designed to look, install and function as close to original as possible. The ballast resistor works in conjunction with the ignition...
Proform Polished HEI Racing Distributor with Black Cap
Designed to meet the high performance demands of racing competition, this unit fits Chevy small block and big block engines. This 100% NEW distributor has all the reliable components of the 66940, but it also includes a...
1953-72 Mopar; Replacement Ignition Coil Ballast Resistor
Replacement Ballast Resistor for 1953-72 Mopar models. The ballast resistor works in conjunction with the ignition coil. During low speed operation, the ballast resistor heats up. The increase in temperature causes an...
MSD; Blaster 3 Series; 45,000 Volt Ignition Coil; Extra Tall Tower; Red
If you are looking to upgrade your stock coil or want to complement the performance of your MSD 5, 6 and 7 Series Ignition, our Blaster Coils are the right choice. The Blaster 3 Coil shares the same special windings and high...
MSD; Blaster 3 Series; 45,000 Volt Ignition Coil; Extra Tall Tower; Red
Classic $69.99 ea
1963-91 Distributor Hold Down Clamp
Ideal to hold distributor in place for accurate timing. This extra bright chrome plated bracket replaces the original unit on various GM applications..
4 Piece Thermo-Flex Plug Wire Heat Shield Set
Thermo-Flex Plug Wire Heat Shield is manufactured with a combination of materials to provide thermal insulation and radiant heat protection. Thermo-Flex Plug Wire Heat Shields can withstand extreme temperatures up to...
Chevrolet Distributor Housing Shims; Small Block, Big Block, and 90° V6 Chevy
When an engine block has been decked or heads have been resurfaced, shims are needed under the distributor to maintain correct clearance. If the distributor sits too low, it can cause damage to the oil pump or camshaft. These...
Chevrolet Distributor Housing Shims; Small Block, Big Block, and 90° V6 Chevy
Classic $12.99 set
1957-74 GM 8 Cylinder Distributor Cap
ACDelco distributor cap for 1957-74 8 cylinder models with Delco Remy breaker point ignition. This distributor cap is a Genuine Delco service replacement part which may differ cosmetically from the originally installed...
Ford Small Block; 221, 260, 289, 302; Distributor Driven Gear;.491" Shaft; Steel
Classic $7.99 ea
1955-74 GM; V8; Premium Distributor Cap And Rotor Set
When you want ignition components that are one step above OE quality, go for the GOLD! Classic Industries® is proud to offer this PREMIUM line of ignition components. World-Class manufacturing technology, high performance...
1959-74 GM; Ignition Coil Bracket; OE Style; 25º angle; Zinc Plated
OER® reproduction of the original style steel coil bracket for use on various GM small block engines. Manufactured from precision stamped and formed steel as original, each bracket is produced to original specifications...
1959-74 GM; Ignition Coil Bracket; OE Style; 25º angle; Zinc Plated
Classic $19.99 ea
Chevrolet Small Block / Big Block Bow Tie Plug Wire Retainer Set
These unique factory wire retainers include the red Bow Tie emblem along with the word Chevrolet molded onto the black nylon head of each wire loom. The head is mounted on a high polished chrome stem. Get a custom look with...
1957-74 V8 GM Distributor Contact Set
Genuine ACDelco contact set for 8 cylinder models with breaker point ignition.
This is replacement distributor lead for a wide variety of classic American car and truck models. High copper wire stranding count ensures maximum flexibility and resistance to breakage. AMC Applications 1968-70 AMX 1963-74...
1974-87 Chevrolet Small Block/Big Block; HEI Ignition Distributor; Clear Cap
This distributor is an inexpensive replacement for your worn out factory distributor and perfect for upgrading to electronic ignition. They are made from 100% new parts and include a high quality distributor cap and rotor...
1974-87 Chevrolet Small Block/Big Block; HEI Ignition Distributor; Clear Cap
Classic $87.99 ea
1960-64 Ford/Mercury 144/170/200 L6 Single Vacuum Distributor - Mustang / Falcon / Comet / Ranchero
Remanufactured, single vacuum, points-type ignition distributor for various 1965-74 Ford and Mercury models. Applications include Mustang, Falcon, Comet, and Ranchero with 144, 170, and 200 cid straight-6 engines. These...
1960-64 Ford/Mercury 144/170/200 L6 Single Vacuum Distributor - Mustang / Falcon / Comet / Ranchero
Classic $144.99 ea
1955-86 Chevrolet Small Block Linear Wire Loom with Bow Tie
Using the valve cover mounting bolts, these handsome chrome plated looms are positioned along the valve cover to hold the wires in a neat parallel arrangement. The epoxy coated BowTie emblem is centrally located for maximum...
1957-74 Chevrolet V8 Distributor Tune Up Kit
Genuine ACDelco service replacement tune-up kit for GM breaker point ignition. Fits 1957-74 GM V8 distributors. Kit includes: Points Condensor Rotor
1955-74 GM; V8; Standard Distributor Cap And Rotor Set
Service replacement cap for 8 cylinder models. The cap features solid brass or copper inserts for longer life and maximum resistance to corrosion and electrical pitting. Their high mineral content and glass reinforced molding...
Proform Iron Distributor Drive Gear
These Proform distributor gears will keep your distributor and cam in sync and meshed together. Their high-quality fitment and gear mesh ensure that you will have accurate timing, and their durable construction will be sure...
1969-74 Ford / Mercury 351C/429/460 BBF Single Vacuum Distributor - Mustang / Cougar/ Truck
New, not remanufactured, single vacuum points-type ignition distributor for various 1969-74 Ford and Mercury models. Applications include Mustang, Torino, Cougar, and F-Series Trucks with 351C, 429, or 460 engines. These...
1969-74 Ford / Mercury 351C/429/460 BBF Single Vacuum Distributor - Mustang / Cougar/ Truck
Classic $124.99 ea