Product#: E2194

Edelbrock Performer Manifold, 253-308 Holden

This Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm....

Product#: OF6019DP

1965-96 Ford Straight-6; 240-300 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Square Bore, 4-Barrel

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: OF5270

1960-68 Chrysler Slant-6; 170-225 cid; Offenhauser Intake Manifold; Single-Quad; Square Bore; Single Plane

Barracuda Quad Manifold- Valiant, Lancer & Dart 170 and 225 cu. in. Engines. ?With Heat? accommodates most any quad carburetor Uses std. 4 bbl carb from 400 CFM to 550 CFM depending on whether for street or competition

Product#: OF6227C

1965-96 Ford Straight-6; 240-300 cid; Offenhauser C Series Intake Manifold; Single-Quad; Square Bore, 4-Barrel

Offenhauser C Series intake manifold for Ford 240-300 cid striaght-6 engines. C Series intake manifolds fill the gap between stock and competition setups for 6-cylinder pickups. They improve torque in the mid and upper...

Product#: E2701

1955-86 Chevrolet 265-400 Small Block without EGR Performer EPS Natural Finish Intake Manifold

The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys. This manifold has a runner design that's tuned for peak power...

Product#: E75011

Performer RPM Air Gap Manifold; For Small Block Chevy; Non-EGR; Polished Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E75013

Performer RPM Air Gap-Nascar Edition Manifold; For Small Block Chevy-Non-EGR; Black Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E2703

Performer EPS Manifold 55-86 Small Block-With Filler Tube And Push-In Breather Cap

Performer EPS Manifold-non EGR for 1967-86 small block Camaro. The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys....

Product#: E2703CP

Edelbrock Performer EPS Intake Manifold; w/Oil Fill Tube; 1955-86 262-400 Small-Block Chevrolet V8; Chrome Plasma

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines...

Product#: E3701

1955-86 Chevrolet Small Block with EGR Edelbrock Performer Natural Finish 4bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: EDL2121

Edelbrock 0-5500 RPM Performer 289 Intake Manifold for Small-Block Ford 289/302 with Satin Finish

The Edelbrock Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Edelbrock Performer manifolds are dual plane, low rise intake manifolds with a patented runner design that you won't...

Product#: E3704

Performer Manifold Small Block TBI 8 Cylinder

1987-95 Manifolds Designed for 1987-95 Chevrolet 5.0L/5.7L V8 with factory Throttle Body Injection. This manifold is a stock replacement/street legal part for 305/350 engines with T.B.I. and is ideal for trucks, Blazers, and...

Product#: OF5253

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E2701CP

Edelbrock Performer EPS Intake Manifold; 1955-86 262-400 Small-Block Chevrolet V8; Chrome Plasma Finish

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented...

Product#: OF5694

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E2101

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Natural Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E7101CP

Edelbrock Performer RPM Intake Manifold; Chevrolet 262-400 Small-Block V8; Chrome Plasma Finish

Edelbrock Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high-performance street/marine engines. Provides power like a single-plane and throttle...

Product#: E27013

1955-86 Sbc Edelbrock Performer EPS Intake Manifold - Black

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: OF5762

1958-78 Chrysler Big Block; RB-Series V8; 413, 426, 440 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E7501BP

Edelbrock Performer RPM AIR-Gap Intake Manifold; 262-400 Small Block Chevy V8; Black Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our...

Product#: OF5616

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: OF5254

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Triple Manifold Intake Manifold; 3 Large Base Rochester 2GC Carbs

Product#: OF5693

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E7501CP

Edelbrock Performer RPM AIR-Gap Intake Manifold; 262-400 Small Block Chevy V8; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our...

Product#: E2701BP

Edelbrock Performer EPS Intake Manifold; 1955-86 262-400 Small-Block Chevrolet V8; Black Plasma Finish

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented...

Product#: E7101BP

Edelbrock Performer RPM Intake Manifold; Chevrolet 262-400 Small-Block V8; Black Plasma Finish

Edelbrock Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high-performance street/marine engines. Provides power like a single-plane and throttle...

Product#: E2703BP

Edelbrock Performer EPS Intake Manifold; w/Oil Fill Tube; 1955-86 262-400 Small-Block Chevrolet V8; Black Plasma

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines...

Product#: E21011

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Polished Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E7501

Performer RPM Air Gap Intake Manifold; Chevy Small Block w/o EGR; Square Bore; Natural Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E7101

1955-86 Chevrolet Small Block without EGR Performer RPM Natural Finish Square Bore Intake Manifold

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: E27011

1955-86 Chevrolet Small Block Edelbrock Performer EPS Non EGR Intake Manifold with Polished Finish

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: E26013

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Black

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E71013

1955-86 Chevrolet Small Block without EGR Performer RPM; Square Bore Intake Manifold; Black Finish

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: E26011

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Polished Aluminum

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E27163

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Black Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: E71011

Edelbrock Performer RPM Intake Manifold 55-86 Small Block, Polished Finish, Without EGR

Performer RPM manifolds are dual-plane, high-rise intake manifolds with a 180+ firing order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match the...

Product#: E5418

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 3 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: E5419

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 4 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: E7525

1955-86 Chevy Small Block w/o EGR Edelbrock RPM Dual-Quad Air Gap Natural Finish Intake Manifold

Convert your 265-400ci small block from a single carburetor to a pair of them with this RPM Air Gap Dual Quad intake! The air-gap design features an open air space that separates the runners from hot engine oil, resulting in...

Product#: E27014

1955-86 Chevrolet 265-400 Small Block without EGR Performer EPS Endurashine Finish Intake Manifold

The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys. This manifold has a runner design that's tuned for peak power...

Product#: E2716BP

Edelbrock Performer EPS Manifold; Small-Block Chevy Vortec; Black Plasma Finish

Edelbrock Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver...

Product#: E7516BP

Edelbrock Performance RPM Air-Gap Manifold; Small-Block Chevy Vortec; Black Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock...

Product#: AFR4812

AFR Eliminator SBC Dual Plane Aluminum Intake Manifold

Fitment Note: Square bore carburetors only and will not fit under stock Corvette hood. Will not fit TBI/TPI 72° Intake Bolt. Cast and machined in the USA

Product#: E7516CP

Edelbrock Performance RPM Air-Gap Manifold; Small-Block Chevy Vortec; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock...

Product#: E2716CP

Edelbrock Performer EPS Manifold; Small-Block Chevy Vortec; Chrome Plasma Finish

Edelbrock Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver...

Product#: AFR4811

AFR Eliminator SBC Race Single Plane Aluminum 4150 Intake Manifold

Cast and machined in the USA

Product#: AFR4810

AFR Eliminator SBC Street/Strip Single Plane Aluminum 4150 Intake Manifold

Air Flow Research is proud to announce the release of our NEW 4810 Eliminator SBC aluminum intake manifold. The new AFR intake manifolds are the perfect way to Eliminate the competition! Features: Operating Range 3000-7500...

Product#: OF1035

1950-62 Chevrolet Stovebolt Inline-6; 235 ci; Offenhauser Dual Intake Manifold; 2 x 1 Barrel

Offenhauser Dual Manifolds are ideal for situations where you want to get a nostalgic 2-carb look, but still have a custom appearance. Precision-machined from cast aluminum , these manifolds are designed to equalize fuel...

Product#: E27161

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Natural Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: E2104

1987-95 Chevy Small Block w/Cast Iron Heads w/o EGR Performer Natural Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: EDL7521

Edelbrock RPM Air Gap 302 1500-6500 RPM Intake Manifold with Satin Finish

This Edelbrock RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8 applications. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition...

Product#: G34401

Chevrolet Performance 25534401 - LS3 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G34394

Chevrolet Performance 25534394 - LS7 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G58675

Chevrolet Performance 88958675 - LS1 / LS2 / LS6 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: E7561CP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...

Product#: E21613

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Black Finish

Product#: EDL2105

Edelbrock Performer 390 Non EGR Idle-5500 RPM with Satin Finish

This Edelbrock Performer 390 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree...

Product#: E7562CP

Edelbrock Performer RPM 2-R Intake Manifold; Chevrolet 396-502 Big-Block V8; Chrome Plasma

Edelbrock Performer RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a...

Product#: E2161CP

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Chrome Plasma

Edelbrock part Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. This version comes with a brilliant Chrome Plasma finish that is durable and...

Product#: E7561BP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Black Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...