Product#: EMP330

Exhaust Manifold Smog Tube Eliminator - 1/2"-20

Correct block-off plug used when converting currently produced exhaust manifolds with holes for smog tubes back to pre-smog usage. Each 8 cylinder manifold requires 4 plugs per side.

Product#: CHARKIT

Charcoal Refill Kit for Vapor Trapper Canister

Maintain peak performance of your Vapor Trapper with their proprietary Charcoal Refill Kit. The same high-efficiency media used in every Vapor Trapper unit. Formulated for a dense, secure pack, this specialized blend is...

Product#: VT6S38

Vapor Trapper; 6" Silver Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6S14

Vapor Trapper; 6" Silver Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: 12562568

1966-2001 Buick, Chevy, Pontiac, Olds; Smog Pump Check Valve: with 3/4" OD Hose

Reproduction smog pump check valve for various 1966-2001 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. This reproduction is designed to replace the existing valve and features an original black finish...

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors.

Product#: G9110

A.I.R. And EGR Vacuum Hose; 5/32" ID; 2 Foot Length

Original A.I.R. or EGR vacuum hose which can be purchased in a 2 foot length. The dimensions are 5/32 I.D. hose x 24 inches.

Product#: VT6B14

Vapor Trapper; 6" Black Charcoal Canister; 1/4" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8B38

Vapor Trapper; 8" Black Charcoal Canister; 3/8" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6B38

Vapor Trapper; 6" Black Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8B14

Vapor Trapper; 8" Black Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8S38

Vapor Trapper; 8" Silver Charcoal Canister; 3/8" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC25B2

Vapor Trapper Billet Clamp Set; Black; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Black anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: VT8S14

Vapor Trapper; 8" Silver Charcoal Canister; 1/4" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC252

Vapor Trapper Billet Clamp Set; Silver; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Silver anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: 153781

1955-67 Chevrolet; Crankcase Vent Tube Assembly; Small Block; 283ci, 327ci

Reproduction of the original crankcase vent tube assembly for Chevrolet 1964-67 283 and 327 non hi-performance small block engines (most 2 bbl vehicles). This vent tube is designed to be used with an inline PCV valve, usually...

Product#: 32406

1980-85 Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: SPE9774

Spectre 9774; Performance Mass Air Flow Couplers

This kit comes with one 3.625 in. to 4.000 in. and two 3.875 in. to 4.000 in. reducers. It adapts most boot-in style GM mass airflow sensors to a 4.000 in. intake system.

Product#: 09033

K&N; Neoprene Gasket for Mass Air Flow

Mass air flow gasket for GM Vehicles. K & N part # 09033

Product#: 11114

1972-80 6 / 8 Cylinder Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resultingi n...

Product#: 32207

1980-86 V6 / V8 Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: E1476

Egr Adapter

Edelbrock EGR Adapter # 1476 has made installing your new intake and carburetor easier when using Part # 3701 and # 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your...

Product#: G5840

1980-93 Smog Pump Check Valve

For the purist who demands perfection, we now offer this original GM A.I.R. check valve. Camaro Applications: 1980-93 exc. 307 Impala / Caprice Applications: 1980-81 305, 350 1982-93 305

Product#: ED8053

Ford Small-Block Windsor 302/5.0L 4V; 4 Barrel EGR Valve Spacer Plate

Edelbrock part #8053 is a 1" tall Ford 4V EGR adapter plate kit. This kit makes installing a new intake and carburetor much easier by repositioning the EGR valve to allow clearance for your carburetor. They're made of cast...

Product#: CRVT0324

1973 Chevrolet Corvette; Emission Hose Kit; 350ci w/Automaitc Transmisison

Emission Hose Kit for 1973 Chevrolet Corvette equipped with a 350ci and Automaitc Transmisison. Replace your old rotted, cracked, missing and unsightly vacuum emisisons hose that you need to pass emissions tests and to get...

Product#: 175020SCA

Chevrolet Small Block; Vintage Air; Front Runner Drive Set; Without Power Steering; Bright Finish

This Vintage Air Front Runner Drive system for Chevrolet Small Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: 174011

LS1/LS2 Black Hardcoat Finish Vintage Air Front Runner Drive Set (Power Steering with Pump)

This Vintage Air Front Runner™ Drive system for GM LS1 and LS2 engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: 174010SCA

1955-82 Chevrolet; Front Runner Drive Set without Pump; Small Block;with Power Steering; Black Finish

This Vintage Air Front Runner Drive system for Chevrolet Small Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: 6484242

1968-76 Buick, Chevrolet, Oldsmobile; Air Cleaner Thermal Intake Vacuum Sensor

Reproduction air cleaner sensor for various 1968-76 Buick, Chevrolet, Pontiac and Oldsmobile models. Replaces OE part number # 6482242. Vacuum Sensonr used on 1969 Pontiac Firebird and 1969-1970 Pontiac GTO Ram Air III and...

Product#: E251

1967-78 Camaro, Impala, Nova, Chevy/GMC Truck; Smog Tube Extension; Small Block

Reproduction A.I.R. smog tube extension tube for 1967-78 GM models as listed. Each extension is manufactured to factory specifications. Designed to fit in the exhaust manifold port under the main A.I.R. (smog) assembly.

Product#: G4751

1982-98 GM Models; Oxygen Sensor

This often overlooked item is a very important component in your late model Firebird. Controlling both the fuel and ignition systems, a bad oxygen sensor can lead to problems such as poor fuel economy, increased emissions,...

Product#: DMK001

1956-67 Road Draft Tube Mount Set

Hardware and gaskets to mount the road draft tube/crankcase vent tube on your vehicle. Includes bolt, washer, gasket and vent tube to block gasket. Chevrolet / GMC Truck applications: 1956-1967 Chevrolet full size passenger...

Product#: 11118

1972-79 AMC, General Motors, Mopar; Smog Pump; Remanufactured

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: 10129569

Chevrolet; Small Block; Smog Pump Delete Bracket w/Pulley; Machined Billet Aluminum

These Billet Aluminum Smog Pump Delete Brackets are designed to be ran in place of the original Smog Pump on 1988-1992 Camaros and Firebirds. No modifications are required to your front accessory drive to install this...

Product#: 10129569B

Chevrolet; Small Block; Smog Pump Delete Bracket w/Pulley; Machined Billet Aluminum; Anodized Black

These Billet Aluminum Smog Pump Delete Brackets are designed to be ran in place of the original Smog Pump on 1988-1992 Camaros and Firebirds. No modifications are required to your front accessory drive to install this...

Product#: R34751

1969-73 Camaro, Impala, Nova, Truck; Smog Tubes; Small Block; without AC; Pair

Reproduction of the original style smog tubes designed for use with 1969-73 Camaro small block models. Each tube is manufactured to correct factory specifications replicating the original design, appearance, and fitment....

Product#: 14674

1969-76 Chevrolet; Smog Diverter Elbow; Various Models

Reproduction of the original smog diverter elbow designed for use with various 1969-76 Chevrolet models as listed. This OEM style aluminum elbow bolts to the smog pump and the diverter valve mounts on the opposite side. Used...

Product#: 1256635

1-1/16" Smog Pump Hose Tower Clamp

Reproduction of the original tower design smog pump hose clamp used on all 1967-1982 vehicles. Featuring the correct 1-1/6" diameter size. Sold individually.

Product#: 154202

1964-67 Crankcase Vent Tube Mounting Parts Set , SB, contains: hose, gasket, seal, washer & bolt.

Reproduction crankcase vent tube mounting parts kit for 1964-1967 GM vehicles. Impala / Full Size passenger car applications: 1964-1967 Chevrolet / GMC Truck applications: 1964-1967 Camaro applications: 1967-1967 Chevy...

Product#: 3849733

1964-1967 Crankcase Vent Tube, SB

Reproduction crankcase vent tube for 1964-1966 GM vehicles. This tube installs on the rear most section of the block directly behind the distributor. Crankcase vent hose and mounting kit (#154202) sold separately. Impala /...

Product#: 11113

1968-71 Smog Pump 6 / 8 Cylinder

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: R34752

1969-74 Camaro, Impala, Nova, Truck; Smog Tubes; 396 Big Block without AC; Pair

Reproduction of the original style smog tubes designed for use with 1969-74 Camaro Big block models. Each tube is manufactured to correct factory specifications replicating the original design, appearance, and fitment. These...

Product#: K0111

1967-75 Chevrolet; Smog Pump Check Valve: For 5/8" OD Hose

Reproduction smog pump check valve for 1967-75 Chevrolet, including Camaro, Chevell, and El Camino among other models with small block or big block engines. This reproduction is designed to replace the existing valve and...

Product#: 14314

1969-75 Chevrolet; Smog Pump Bracket; Small Block

Reproduction of the original smog pump bracket for use with various 1969-75 Chevrolet models with small block engines. Each breacket is manufactured in stamped steel to correct factory dimensions replicating the original in...

Product#: K1132

1969-74 Camaro, Impala, Nova; Smog Pump Pulley; Single Deep Groove; Hi Po 302, 350, 396, 427, 454

Quality reproduction of the original single, deep groove A.I.R. (air injection reactor) smog pump pulley designed for use with various 1969-74 Chevrolet models as listed below. This version is specifically designed for 302,...

Product#: K0020

1965-81 Various Chevrolet Vehicles; PCV Hose Support Bracket; Big Block

1965-73 Chevrolet PCV hose support bracket for High Performance big block engines. Mounts to second intake manifold stud on left side of engine. Chevrolet Vehicles with: 396ci-375hp 427ci-425hp 427ci-390hp

Product#: SH69

1969-70 Camaro, Impala, Nova; Smog Hose Set with Clamps; Small Block

Reproduction of the original style smog hoses and clamps designed for use with 1969-70 Chevrolet models with small block engines as listed. Includes correct white stripe hoses. black hose tie, and 4 correct tower clamps for...

Product#: SP10678

1967-68 Camaro, Impala, Caprice, Nova; Lower Smog Pump Bracket; 302, 307, 327, 350 Small Block

Reproduction lower smog pump bracket for various 1967-68 Chevrolet Camaro, Impala, Bel Air, Biscayne, Caprice, and Nova models with 302, 307, 327, 350 small block engines. Each bracket is manufactured in stamped steel to the...

Product#: G5135

Air Tube Diverter Valve 3-Way Tee -- Multiple Uses

Correct original GM replacement T-connector for use wherever a 3/16" tee connector is needed.

Product#: G6991

1971-77, 1982 & 1994-95 Fuel Charcoal Canister - For Use With 2 Port

Original GM fuel vapor charcoal canister used to help cut down or eliminate fuel vapors. Essential part of the fuel and emissions system. Camaro Applications: 1974-77 350 1976-77 305 1982 2.5-2 Firebird Applications: 1971 all...

Product#: K0158

1970 Camaro, Big Block Smog Hose Set

Reproduction of the original style smog hoses and clamps designed for use with various 1970 Chevrolet models with 396, 402, 427 big block engines. Includes correct white stripe hoses same as original, black hose tie, and 4...

Product#: 32212

1980-86 General Motors, 1978, 1980-86 Mopar V6 / V8 Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: 3726641

1957-62 Crankcase Vent Tube

Reproduction crankcase vent tube for 1956-1962 GM vehicles. This tube installs on the rear most section of the block directly behind the distributor. Crankcase vent tube mounting kit (#DMK001) sold separately. Impala / Full...

Product#: 10186167

1988-92 Chevrolet Camaro, 1988-92 Pontiac Firebird; Smog Pump Delete Bracket w/Pulley

These Billet Aluminum Smog Pump Delete Brackets are designed to be ran in place of the original Smog Pump on 1988-1992 Camaros and Firebirds. No modifications are required to your front accessory drive to install this...

Product#: K1036

1968-69 Chevrolet, 1968-74 Corvette; Smog Pump Pulley; Single Standard Groove; 396, 427; Big Block

Quality reproduction A.I.R. (air injection reactor) smog pump pulley for 1968 Chevrolet big block, 1969 Chevy/GMC truck, and 1968-74 Corvette big block models. This pulley is manufactured to exact factory specifications and...

Product#: JT69103

1994-97 GM Car/Truck/SUV; LT1 5.7L; Jet Performance Power-Flo Mass Air Sensor

This Power-Flo Mass Air Sensor from JET delivers higher airflow than stock and better metering to deliver more horsepower. Increases throttle response and horsepower by creating a smoother flow of air into the intake manifold...

Product#: 10055877

1986-89 Camaro, Corvette, Firebird; Mass Airflow Sensor

Reproduction mass airflow sensor for various 1986-89 Camaro, Corvette, and Firebird models, as listed below. Produced according to the highest standards of quality and precise specifications. 3 signs of a bad mass air flow...

Product#: K0184

1969-81 Camaro; Nova; Smog Pump Pulley; Single Deep Grove; Small Block, Big Block

Reproduction of the original deep groove A.I.R. (air injection reactor) smog pump pulley designed for use with for high performance small block, and big block (396/375hp) models. Each pulley is manufactured to correct factory...

Product#: 32426

1987-92 2.8L / 3.1L Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: VC123

1998-13 Fuel Vapor Charcoal Cannister

Replacement fuel vapor charcoal cannister used to help cut down or eliminate fuel vapors. Essential part of the fuel and emissions system. Mounts near firewall on LH side of engine compartment.